Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Tayser #1
http://www.luthiersforum.com/forum/viewtopic.php?f=10134&t=40506
Page 1 of 1

Author:  Tayser [ Wed May 29, 2013 5:55 pm ]
Post subject:  Tayser #1

Im not in the contest because i started the build a year ago. I have not finished it yet but started working on it again and thought this maybe the push I need to finish it. I carved my own neck and screwed up the first fret board I put on it. thats where i stopped last May or June. So this year I put a new finger board on and fretted. Now i need to start routing out the cavities on the body. heres some pics.

Author:  Tayser [ Wed May 29, 2013 6:03 pm ]
Post subject:  Re: Tayser #1

work I did this year on the new finger board

Author:  Tayser [ Wed May 29, 2013 6:06 pm ]
Post subject:  Re: Tayser #1

frets pressed in. as you can see my truss rod access is pretty rough. I will do a much better job next time. Theres many things I will do differently on my next build.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/