Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 1:07 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Sat Apr 13, 2013 5:43 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Dec 23, 2011 10:17 am
Posts: 292
First name: Linus
City: Brooklyn
State: NY
Zip/Postal Code: 11215
Country: USA
Focus: Build
Status: Amateur
Wow. Seeing the adventurous builds others are doing for their first or second build has me humbled.
I'm sticking with an OM kit build for my first few. My first one was finished last month and turned out great. I learned a ton from it and shipped it off to my neice and her husband (he plays) who are the proud (and exhausted) new parents of twin boys.

I bought ~ 4 guitars worth of Martin factory 2nd grade parts from a guy here on this forum. It gives me a lot to work with for a minimal $$$ investment.

I started this second build last month before I realized this challenge existed so I'm jumping in a little late and some of the early steps aren't documented but I'll catch up here/now.

It's a mahogany/spruce 14 fret OM build. I might be disqualified already oops_sign because the fretboard is already inlayed with markers, fretted, and bound. That's the way it came. I'm not sure why they chose to not use it. It looks fine to me.
The top was already joined with the rosette inlayed as well.

I thicknessed and joined the back. The sides were already bent.
I glued in the neck block, heal block, and kerfing.

Then I braced the top and scalloped it.

Image

Image

And braced the back.

Image

I glued in the backstrip.

Image

I finished trimming the braces and notched the rim for the brace ends. Then I glued on the top.

Image

The top tap tone is an A sharp. I'm not sure what that will mean or how I would carve the braces or top to change that but there's plenty of time to learn that.

Image

The back was ready to go on.

Image

So, it's back to the go-bar deck.

Image

So far, so good. I trimmed the top and back edges flush and got to work on fitting the neck.

Image

Image

Image

I flossed the neck. Just a bit at a time and kept checking and rechecking my progress.

Image

After lots of adjustments the center finder was dead on.

Image

I radiused the bottom of the bridge to the top of the guitar but won't be gluing the bridge down for a while.

Image

And checking the straight edge to the bridge height it looks like I"m all set there too.

Image

And that catches me up to today. I'm putting together the Stew Mac True Channel binding jig. I used a dremel tool with an attachment for build#1 and trimming the top/back edges flush today. The binding cutting on #1 was a weak point so I'm looking forward to using this new jig.

I'm planning on white binding with b/w purfling, a white end wedge. I did a french polish with #1 and had a good experience with it. I was frustrated by the filler I used last time (a paste) and will try Z-poxy this time. I want to paint a black stinger on the back of the neck heal and headstock like some GIbsons. I've always liked the look and I need to hide a pitch pocket on the back of the headstock. I'm going to try to spray a sunburst on the top. I'll finish it off with a french polish topcoat (can shellac go over lacquer?)

Thanks for looking and PLEASE give me advice/feedback.

From a basement in Brooklyn...
Linus


Top
 Profile  
 
PostPosted: Sat Apr 13, 2013 5:49 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
Looks good to me!

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
PostPosted: Sat Apr 13, 2013 6:52 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Dec 23, 2011 10:17 am
Posts: 292
First name: Linus
City: Brooklyn
State: NY
Zip/Postal Code: 11215
Country: USA
Focus: Build
Status: Amateur
Thanks Tony. Are there other forum members in NYC?


Top
 Profile  
 
PostPosted: Sat Apr 13, 2013 7:08 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Linus wrote:
Thanks Tony. Are there other forum members in NYC?


As soon as they find out about Tony...........they leave laughing6-hehe

Did you carve your braces? I've never seen scallops in front of the X?


Top
 Profile  
 
PostPosted: Sat Apr 13, 2013 9:33 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Dec 23, 2011 10:17 am
Posts: 292
First name: Linus
City: Brooklyn
State: NY
Zip/Postal Code: 11215
Country: USA
Focus: Build
Status: Amateur
Clinchriver wrote:
Linus wrote:
Thanks Tony. Are there other forum members in NYC?



Did you carve your braces? I've never seen scallops in front of the X?



I didn't do much to the height but I did taper them in front of the X.


Top
 Profile  
 
PostPosted: Sun Apr 14, 2013 2:42 am 
Offline
Cocobolo
Cocobolo

Joined: Tue Oct 16, 2012 1:23 am
Posts: 262
First name: nick
Last Name: dingle
Focus: Build
Status: Amateur
Ex-NYC, East Village for the most part. Don't talk to Tony unless you have a goat to offer him.....




or maybe a llama


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com