Official Luthiers Forum!
http://www.luthiersforum.com/forum/

All you Americans/Canadians!
http://www.luthiersforum.com/forum/viewtopic.php?f=10132&t=35699
Page 1 of 1

Author:  WindyCityBluesBox [ Fri Mar 09, 2012 10:59 am ]
Post subject:  All you Americans/Canadians!

I live in Iowa and Im trying to decide what to use as a fingerboard. The only suitable fingerboard wood that that I know of that grows around us is rock maple. Do any of you who live in North America know of any others? (I was thinking of using walnut but upont doing some research I found that that walnut will have durability/pitting issues) -Alex

Author:  Robert Renick [ Fri Mar 09, 2012 11:42 am ]
Post subject:  Re: All you Americans/Canadians!

I just prepared some boards for my challenge build, I made one maple, one walnut and one cherry, I am dubious with the walnut, but I think I will be making a uke, and I will try the walnut. I am wondering what the fish glue wash would do for the durability. Black locus I hear is a good N American fb wood.
Rob

Author:  Alex Kleon [ Fri Mar 09, 2012 3:54 pm ]
Post subject:  Re: All you Americans/Canadians!

I picked up a piece of black locust for a finger board. I haven't done anything with it yet, but it should be plenty hard enough. I'll likely laminate it so that it will have quarter grain.

Alex

Author:  Clinchriver [ Fri Mar 09, 2012 8:56 pm ]
Post subject:  Re: All you Americans/Canadians!

I'm going with some persimmon I cut off my place here in Tennessee, fingerboard, & bridge. Going with local black locust for the bridge plate.

Author:  Chameleon [ Sat Mar 10, 2012 1:16 am ]
Post subject:  Re: All you Americans/Canadians!

My cocobolo is from Mexico. That is North America.

Author:  Mitch Johnson [ Mon Mar 12, 2012 2:22 pm ]
Post subject:  Re: All you Americans/Canadians!

I picked up some Desert Ironwood from Arizona on ebay that were being sold as knife scales for bridge blanks...Otherwise I've been pondering mesquite, and osage orange also for fretboards. All are kind of difficult to obtain, and the ironwood and mesquite are kind of expensive (trying to keep the whole thing under 150 bucks). I hadn't thought about Cocobolo..Could be a good option! If I go with maple, I think I would get some jet black, as I'm not a big fan of the color on acoustics.

Author:  Steve Kinnaird [ Fri Mar 16, 2012 7:46 am ]
Post subject:  Re: All you Americans/Canadians!

I second Desert Ironwood, and then there's always Texas "ebony":
Grows in our valley, and though not a true ebony, seems just as hard.
Color ranges from dark golden brown to a dark blackish mauve.

Steve

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/