Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Side Bending Springs Steal?
http://www.luthiersforum.com/forum/viewtopic.php?f=10128&t=51497
Page 1 of 1

Author:  Steve-atl [ Wed Jan 23, 2019 11:06 am ]
Post subject:  Side Bending Springs Steal?

I have been gathering materials and equipment to bend my first sides. I have my mahogany thinned and ready to go. As I was reviewing the YouTube video on bending ukulele sides I realized I don’t have my springs steal. Is this something I can get it Home Depot or locally? Looks like StewMac has some but it’s $25 for 24"x4" piece. Seems a little pricy

Thanks

Author:  CarlD [ Wed Jan 23, 2019 2:57 pm ]
Post subject:  Re: Side Bending Springs Steal?

You can use aluminum flashing instead of the spring steel. I've used it for bending about ten sets of guitar sides so far. One of these days I'll get some steel slats from John Hall.

Author:  Steve-atl [ Wed Jan 23, 2019 3:16 pm ]
Post subject:  Re: Side Bending Springs Steal?

CarlD wrote:
You can use aluminum flashing instead of the spring steel. I've used it for bending about ten sets of guitar sides so far. One of these days I'll get some steel slats from John Hall.



Something like this

https://www.homedepot.com/p/Amerimax-Ho ... /100071450

Author:  CarlD [ Wed Jan 23, 2019 3:36 pm ]
Post subject:  Re: Side Bending Springs Steal?

Yeah, but get a narrower roll, 6" to 10".

Author:  Bryan Bear [ Wed Jan 23, 2019 4:33 pm ]
Post subject:  Re: Side Bending Springs Steal?

I'm in the same boat with CarlD. I got some 6" aluminum flashing from the local hardware store to get started. I never got around to ordering "proper" slats. I'm sure they would be better, but I'm getting by okay without them.

Author:  Rodger Knox [ Wed Jan 23, 2019 4:41 pm ]
Post subject:  Re: Side Bending Springs Steal?

Bryan Bear wrote:
I'm in the same boat with CarlD. I got some 6" aluminum flashing from the local hardware store to get started. I never got around to ordering "proper" slats. I'm sure they would be better, but I'm getting by okay without them.


Me too.

Author:  Bob Shanklin [ Thu Jan 24, 2019 11:40 am ]
Post subject:  Re: Side Bending Springs Steal?

This is what I use: https://www.amazon.com/010-Thick-Stainless-Steel-Stock/dp/B006D1JQT6/ref=sr_1_4?s=industrial&ie=UTF8&qid=1548347276&sr=1-4&refinements=p_4%3AShop+Aid%2Cp_n_feature_seven_browse-bin%3A5485702011 . But wow, prices have more than tripled in ten years. This stuff is stiff, and doesn't deform or deflect. It should last me forever beehive .

Author:  Bryan Bear [ Thu Jan 24, 2019 11:47 am ]
Post subject:  Re: Side Bending Springs Steal?

Bob Shanklin wrote:
This is what I use: https://www.amazon.com/010-Thick-Stainless-Steel-Stock/dp/B006D1JQT6/ref=sr_1_4?s=industrial&ie=UTF8&qid=1548347276&sr=1-4&refinements=p_4%3AShop+Aid%2Cp_n_feature_seven_browse-bin%3A5485702011 . But wow, prices have more than tripled in ten years. This stuff is stiff, and doesn't deform or deflect. It should last me forever beehive .


At 50" length per roll you would need to get two rolls and cut them down to get two slats?

Author:  Bob Shanklin [ Sat Jan 26, 2019 5:21 pm ]
Post subject:  Re: Side Bending Springs Steal?

Yea, you need a pair of them Bryan. They were under 10 bucks when I got mine.

Bob

Author:  Bryan Bear [ Sat Jan 26, 2019 7:13 pm ]
Post subject:  Re: Side Bending Springs Steal?

Bob Shanklin wrote:
Yea, you need a pair of them Bryan. They were under 10 bucks when I got mine.

Bob


I didn’t mean to use a question mark. I just wanted to point that out to anyone who was going to order them so they didn’t have to order twice.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/