Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Mar 19, 2024 2:17 am


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Thu Dec 27, 2018 10:11 am 
Offline
Mahogany
Mahogany

Joined: Mon Dec 10, 2018 5:40 pm
Posts: 47
First name: Steve
Last Name: Schaefer
City: Atlanta
State: Ge
Zip/Postal Code: 30310
Country: United States
Focus: Build
Status: Amateur
Grizzlies 10 inch drum sander is on sale for $618 shipped. The problem is it only sands down to a 1/4". I guess I could use a backing board when I needed to sand something thinner but that seems like a hassle.
Any drum sander I should be looking at. Yes, the cost is a consideration. :)

Thank you


http://www.grizzly.com/products/Grizzly ... oEALw_wcB#


Top
 Profile  
 
PostPosted: Thu Dec 27, 2018 10:50 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
You might move this to the Guitar Building page for more responses. I just bought a used Performax 16/32. So far I like it a lot

Ed


Top
 Profile  
 
PostPosted: Thu Dec 27, 2018 1:28 pm 
Offline
Mahogany
Mahogany

Joined: Mon Dec 10, 2018 5:40 pm
Posts: 47
First name: Steve
Last Name: Schaefer
City: Atlanta
State: Ge
Zip/Postal Code: 30310
Country: United States
Focus: Build
Status: Amateur
Ruby50 wrote:
You might move this to the Guitar Building page for more responses. I just bought a used Performax 16/32. So far I like it a lot

Ed

That's funny I was just talking with a guy about a used Performax 16/32. So you like it?

Thanks


Top
 Profile  
 
PostPosted: Thu Dec 27, 2018 2:52 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2245
Location: Seattle WA
Focus: Build
Status: Semi-pro
They always say minimum thickness is 1/8 or more, but it seems like everyone is able to sand much thinner. I've never heard of anyone using that particular one. I had the jet 1020 and I was able to go down to less than a 1/16. The same on several larger ones.

New username, same Pat Mac

_________________
Pat


Top
 Profile  
 
PostPosted: Thu Dec 27, 2018 3:31 pm 
Offline
Mahogany
Mahogany

Joined: Mon Dec 10, 2018 5:40 pm
Posts: 47
First name: Steve
Last Name: Schaefer
City: Atlanta
State: Ge
Zip/Postal Code: 30310
Country: United States
Focus: Build
Status: Amateur
Pmaj7 wrote:
They always say minimum thickness is 1/8 or more, but it seems like everyone is able to sand much thinner. I've never heard of anyone using that particular one. I had the jet 1020 and I was able to go down to less than a 1/16. The same on several larger ones.

New username, same Pat Mac


What are tops sanded down to?

It seems like you could make a sled if you wanted to go thinner. Maybe some MDF with sandpaper glued on. would that work?


Top
 Profile  
 
PostPosted: Thu Dec 27, 2018 3:47 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2245
Location: Seattle WA
Focus: Build
Status: Semi-pro
.09" sure you could, but no need I think.

New username, same Pat Mac

_________________
Pat


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com