Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 6:15 pm


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Thu Jan 08, 2015 1:21 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat May 12, 2007 6:11 am
Posts: 176
Location: Canada
I am intending to build a Puerto Rican cuatro. The plans for the instrument, and in fact the traditional way of doing it, calls for a piece of wood as thick as the sides, Then the instrument is sawn out of, or hollowed out of the wood, including, it seems, the neck. However, I would like to build one with bent sides, and would appreciate any information anyone could provide. Thanks.

_________________
Under Compensated Nut!


Top
 Profile  
 
PostPosted: Mon Jan 12, 2015 12:13 am 
Offline
Koa
Koa

Joined: Sat Nov 07, 2009 9:34 pm
Posts: 552
City: winnipeg
State: manitoba
Country: canada
Focus: Build
Status: Amateur
Try The Guild of American Luthiers web site. They might have plans available.

Just my gut instinct.

Bob :ugeek:


Top
 Profile  
 
PostPosted: Mon Jan 12, 2015 10:26 am 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
I'm glad you posted this question. I've never seen one of these instruments but I've heard OF them, and I once met a performer from Trinidad who told me he played one.

Your post suggests that you have a set of plans for the traditional method. It seems as though you should be able to derive your own bent side plan from that. You could improvise a way of bending and attaching the "c" bouts by reading up on violin making methods. I did an image search just now and discovered that plenty of builders are using an attached neck--very similar to guitar construction.

You've probably seen this video slideshow, too, but I'll attach a link. Some of the table saw techniques in the video look very dangerous to me, but there are safe ways to do those operations. The guy in the slide show is shown building a separate neck. Pretty interesting. Second link is to a page you might already have seen. It includes PDFs of construction procedures and its own link to a plan.

https://www.youtube.com/watch?v=deZ5Ht0ha7E

http://www.cuatro-pr.org/node/45


Top
 Profile  
 
PostPosted: Tue Jan 13, 2015 9:34 am 
Offline
Walnut
Walnut

Joined: Tue Nov 25, 2008 11:07 am
Posts: 4
You might also try contacting William Cumpiano. I believe he is quite the expert and should be able to steer you in the right direction.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com