Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Mar 29, 2024 10:01 pm


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Archtop Ukulele
PostPosted: Sat Nov 30, 2013 9:15 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Nov 01, 2011 10:17 pm
Posts: 190
First name: Raymond
Last Name: Pipkin
Focus: Build
Status: Amateur
Been working on this a while. A friend asked me to make a uke and when I asked if I could build anything I want, he said yes.

:0


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: Archtop Ukulele
PostPosted: Sat Nov 30, 2013 9:40 pm 
Offline
Koa
Koa

Joined: Sat Nov 07, 2009 9:34 pm
Posts: 552
City: winnipeg
State: manitoba
Country: canada
Focus: Build
Status: Amateur
Very nice!
How did you arch the top and back?
Nice laminated neck.
What wood was used?

I am trying for similar results using an eight foot radius dish but my results are less effective.

Bob :ugeek:


Top
 Profile  
 
 Post subject: Re: Archtop Ukulele
PostPosted: Sat Nov 30, 2013 9:59 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Nov 01, 2011 10:17 pm
Posts: 190
First name: Raymond
Last Name: Pipkin
Focus: Build
Status: Amateur
unkabob wrote:
Very nice!
How did you arch the top and back?
Nice laminated neck.
What wood was used?

I am trying for similar results using an eight foot radius dish but my results are less effective.

Bob :ugeek:


Thanks Bob. I carved the top and back like a very thin mandolin or guitar, just kind of eyeballed the curves and used the shape of roughly a Martin concert size body. No bracing except a patch to reinforce under the bridge.

Thats a sitka top, flame maple back and sides, mahogany neck, pau fero headstock overlay, fretboard and tail piece, an ebony bridge and plastic binding. I finished it with EM7000 and blue and black trans tint dye.

Ray


Top
 Profile  
 
 Post subject: Re: Archtop Ukulele
PostPosted: Sun Dec 01, 2013 7:00 am 
Offline
Walnut
Walnut

Joined: Thu Jan 31, 2013 6:17 am
Posts: 29
First name: Gary
Last Name: Gill
City: Greenwood
State: Indiana
Country: USA
Focus: Build
Status: Amateur
Very nice work. How would you compare the sound to a standard ukulele sound?


Top
 Profile  
 
 Post subject: Re: Archtop Ukulele
PostPosted: Sun Dec 01, 2013 11:28 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Beautiful ! Sound clip Video PLEASE

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Archtop Ukulele
PostPosted: Sun Dec 01, 2013 12:52 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Nov 01, 2011 10:17 pm
Posts: 190
First name: Raymond
Last Name: Pipkin
Focus: Build
Status: Amateur
Thanks guys. I think this has a bit more percussive sound than flat top ukes, but still sounds like one overall. The top and back are somewhere between .060 and .080 inch thick and the back vibrates a lot when strumming.

I'm not a player but I'm pretty certain it will sound better in the hands of someone who can play. I did a little video but don't really have a way to upload it. If I figure it out later I'll post.

Ray


Top
 Profile  
 
 Post subject: Re: Archtop Ukulele
PostPosted: Sun Dec 01, 2013 1:02 pm 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
That's cool, Raymond. John D'Angelico made at least one arch top uke, too. Perhaps you've seen a picture of it. It's featured in the book ACQUIRED OF THE ANGELS. I don't believe there was any commentary regarding internal bracing on his. Yours is only the second one I can recall having seen anywhere. I'd say your friend was both smart and lucky when he said "yes".
Patrick


Top
 Profile  
 
 Post subject: Re: Archtop Ukulele
PostPosted: Sun Dec 01, 2013 4:03 pm 
Offline
Koa
Koa

Joined: Sat Nov 07, 2009 9:34 pm
Posts: 552
City: winnipeg
State: manitoba
Country: canada
Focus: Build
Status: Amateur
Carving at that thickness sounds scary.
I have to be careful at that thickness using my drum sander.

Bob :ugeek:


Top
 Profile  
 
 Post subject: Re: Archtop Ukulele
PostPosted: Sun Dec 01, 2013 5:39 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Nov 01, 2011 10:17 pm
Posts: 190
First name: Raymond
Last Name: Pipkin
Focus: Build
Status: Amateur
cphanna wrote:
That's cool, Raymond. John D'Angelico made at least one arch top uke, too. Perhaps you've seen a picture of it. It's featured in the book ACQUIRED OF THE ANGELS. I don't believe there was any commentary regarding internal bracing on his. Yours is only the second one I can recall having seen anywhere. I'd say your friend was both smart and lucky when he said "yes".
Patrick


Thanks Patrick. No I haven't seen the book yet. I keep meaning to pick up a copy but never seem to get around to it. I've seen a few like this around on the internet though not many examples really.

Ray


Top
 Profile  
 
 Post subject: Re: Archtop Ukulele
PostPosted: Sun Dec 01, 2013 5:59 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Nov 01, 2011 10:17 pm
Posts: 190
First name: Raymond
Last Name: Pipkin
Focus: Build
Status: Amateur
unkabob wrote:
Carving at that thickness sounds scary.
I have to be careful at that thickness using my drum sander.

Bob :ugeek:


It was scary for me. But I just carved the outside first, then marked the depth of the inside face with a drill-press set to about 3/32" before carving. I worked with forstner bit, scraper, plane and chisel until I lost my nerve then switched to a 5" random orbit sander to even things out. Then I kept going back and forth with that until I felt like I went a smidge too far. I'm actually pretty stoked the whole thing didn't collapse under tension.


Top
 Profile  
 
 Post subject: Re: Archtop Ukulele
PostPosted: Mon Dec 02, 2013 12:49 pm 
Offline
Koa
Koa

Joined: Sat Nov 07, 2009 9:34 pm
Posts: 552
City: winnipeg
State: manitoba
Country: canada
Focus: Build
Status: Amateur
That is a lot of work to achieve what you have.
I am impressed.

Bob :ugeek:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com