Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 10:00 am


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Ukulele binding jig?
PostPosted: Thu Dec 13, 2018 1:45 pm 
Offline
Mahogany
Mahogany

Joined: Mon Dec 10, 2018 5:40 pm
Posts: 47
First name: Steve
Last Name: Schaefer
City: Atlanta
State: Ge
Zip/Postal Code: 30310
Country: United States
Focus: Build
Status: Amateur
I was thinking of picking up one of LMIs Binding Machines and the binding machine carrier. I called and they said the binding machine carrier will not scale down to fit a Ukulele. Does anyone of a binding jig made for a Ukulele?

Thanks


Top
 Profile  
 
 Post subject: Re: Ukulele binding jig?
PostPosted: Thu Dec 13, 2018 3:19 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Dec 01, 2006 6:44 pm
Posts: 471
Location: Australia
First name: Allen
Last Name: McFarlen
City: Mt. Sheridan
State: Qld.
Zip/Postal Code: 4868
Country: Australia
Focus: Build
Status: Professional
I only use the StewMac binding router bits with bearings in my Makita laminate trimmer. No jigs, holders etc. Over 300 ukes now and can't imagine needing anything more complicated.

_________________
Allen R. McFarlen
Barron River Guitars & Ukuleles
Facebook
Cairns, Australia


Top
 Profile  
 
 Post subject: Re: Ukulele binding jig?
PostPosted: Thu Dec 13, 2018 7:29 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2246
Location: Seattle WA
Focus: Build
Status: Semi-pro
I'm not sure how the LMI works, but I have a Blues Creek jig and carriage. It allows me to flip the foam piece around and it works great for ukulele. You can't go wrong with Blues Creek!Image

New username, same ole Pat Mac

_________________
Pat


Top
 Profile  
 
 Post subject: Re: Ukulele binding jig?
PostPosted: Thu Dec 13, 2018 7:45 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Jul 01, 2011 2:14 pm
Posts: 268
Location: Creedmoor, NC
First name: Tim
Last Name: Benware
City: Creedmoor
State: NC
Zip/Postal Code: 27522
Country: USA
Focus: Build
Status: Professional
Steve-atl wrote:
I was thinking of picking up one of LMIs Binding Machines and the binding machine carrier. I called and they said the binding machine carrier will not scale down to fit a Ukulele. Does anyone of a binding jig made for a Ukulele?

Thanks

I use LMIs jig and made my own cradle for ukuleles and it works fine for me.

_________________
"I've been had again"
Tim Benware
Creedmoor, NC


Top
 Profile  
 
 Post subject: Re: Ukulele binding jig?
PostPosted: Thu Dec 13, 2018 9:52 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
I got one of these $35 binding jigs from Ken Cierpowski (no longer in business I think). I have used it with success on 7 guitars, but on the only uke I built I was able to clamp it in the vice and pass the body over it. Very simple, quick, effective, and almost foolproof.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: Ukulele binding jig?
PostPosted: Fri Dec 14, 2018 10:26 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
You need a closely sized cradle for any of the tower binding systems or the cradle will bump into the tower. I drilled some ukulele holes in my cradle and installed brass inserts; a very easy modification. but I use a Fleischmann binding system that reaches over the cradle.

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
 Post subject: Re: Ukulele binding jig?
PostPosted: Sat Dec 15, 2018 1:06 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2246
Location: Seattle WA
Focus: Build
Status: Semi-pro
johnparchem wrote:
You need a closely sized cradle for any of the tower binding systems or the cradle will bump into the tower. I drilled some ukulele holes in my cradle and installed brass inserts; a very easy modification. but I use a Fleischmann binding system that reaches over the cradle.
I hadn't thought about that, but yes I use a Fleischman style also.

New username, same ole Pat Mac

_________________
Pat


Top
 Profile  
 
 Post subject: Re: Ukulele binding jig?
PostPosted: Sat Dec 15, 2018 4:26 pm 
Offline
Mahogany
Mahogany

Joined: Mon Dec 10, 2018 5:40 pm
Posts: 47
First name: Steve
Last Name: Schaefer
City: Atlanta
State: Ge
Zip/Postal Code: 30310
Country: United States
Focus: Build
Status: Amateur
I love this forum!!!

I have used a router with binding router bits and bearings to cut slots on a guitar and it worked fine, but the Ukulele has a slight curve to the back. I am afraid the binding slot will not be cut straight. Am I over thinking this?


Top
 Profile  
 
 Post subject: Re: Ukulele binding jig?
PostPosted: Sat Dec 15, 2018 4:30 pm 
Offline
Mahogany
Mahogany

Joined: Mon Dec 10, 2018 5:40 pm
Posts: 47
First name: Steve
Last Name: Schaefer
City: Atlanta
State: Ge
Zip/Postal Code: 30310
Country: United States
Focus: Build
Status: Amateur
Ben-Had wrote:
Steve-atl wrote:
I was thinking of picking up one of LMIs Binding Machines and the binding machine carrier. I called and they said the binding machine carrier will not scale down to fit a Ukulele. Does anyone of a binding jig made for a Ukulele?

Thanks

I use LMIs jig and made my own cradle for ukuleles and it works fine for me.



I think I posted this on the wrong response and now I can't see how to delete it

That looks sweet

Are those blocks of wood with rubber around them? Where did you get the rubber


Top
 Profile  
 
 Post subject: Re: Ukulele binding jig?
PostPosted: Sun Dec 16, 2018 4:25 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Apr 14, 2008 3:20 am
Posts: 376
Location: Kapolei HI
First name: Aaron
Focus: Build
Status: Semi-pro
Made my own, too easy. Both the jig and the cradle.
See post #13. It’s since been updated with a DeWalt DW611 and a Zero-bar style bearing foot (made that too).
https://forum.ukuleleunderground.com/sh ... -box/page2

Note, the cradle is set for one size, but it can easily be made adjustable. Most guys I know that use a binding jig for ukulele have an LMI or SMD. Haven’t seen anyone around me with a parallelogram.


Last edited by Aaron O on Mon Dec 17, 2018 11:24 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Ukulele binding jig?
PostPosted: Sun Dec 16, 2018 8:15 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2246
Location: Seattle WA
Focus: Build
Status: Semi-pro
Steve-atl wrote:
Ben-Had wrote:
Steve-atl wrote:
I was thinking of picking up one of LMIs Binding Machines and the binding machine carrier. I called and they said the binding machine carrier will not scale down to fit a Ukulele. Does anyone of a binding jig made for a Ukulele?

Thanks

I use LMIs jig and made my own cradle for ukuleles and it works fine for me.



I think I posted this on the wrong response and now I can't see how to delete it

That looks sweet

Are those blocks of wood with rubber around them? Where did you get the rubber
Assuming you were responding to my pic, that's what came from Blue's Creek. They are just plywood squares with like some weather stripping around the edges. Works great!

New username, same ole Pat Mac

_________________
Pat


Top
 Profile  
 
 Post subject: Re: Ukulele binding jig?
PostPosted: Mon Dec 17, 2018 11:03 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2246
Location: Seattle WA
Focus: Build
Status: Semi-pro
Ruby50 wrote:
I got one of these $35 binding jigs from Ken Cierpowski (no longer in business I think)


Yes, he is definitely no longer in business. Sadly, he won't be posting anymore here either and is greatly missed.

New username, same Pat Mac

_________________
Pat


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com