Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 8:29 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Fretboard Markers
PostPosted: Fri Mar 10, 2023 3:59 pm 
Offline
Mahogany
Mahogany

Joined: Sat Mar 02, 2019 2:15 am
Posts: 51
First name: Patrick
Last Name: Wirta
City: Eagle
State: Idaho
Country: USA
Focus: Build
Status: Amateur
The telecaster I am building has a maple fretboard, the body is Padauk. I am going to use Padauk markers for the fretboard and wanted to know the best way to prepare the maple so that I don’t impregnate the board with Padauk dust. I plan to use a sanding sealer to seal the maple. This is the first maple fretboard I have done. I appreciate any feedback from those that have done something similar.

Thanks,
Patrick


Top
 Profile  
 
 Post subject: Re: Fretboard Markers
PostPosted: Fri Mar 10, 2023 9:07 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Image
Patrick,
I mixed Padauk and Maple with no problems.
I did not do anything other than sand and finish.
Perhaps the Maples pores were too small to get Padauk dust in them.


Sent from my iPad using Tapatalk

_________________
wah
Wah-wah-wah-wah
Wah



These users thanked the author dzsmith for the post (total 2): Durero (Sat Mar 11, 2023 5:29 pm) • Hesh (Sat Mar 11, 2023 4:12 am)
Top
 Profile  
 
 Post subject: Re: Fretboard Markers
PostPosted: Sat Mar 11, 2023 1:19 am 
Offline
Mahogany
Mahogany

Joined: Sat Mar 02, 2019 2:15 am
Posts: 51
First name: Patrick
Last Name: Wirta
City: Eagle
State: Idaho
Country: USA
Focus: Build
Status: Amateur
Thanks Dan, nice looking Flying V!



These users thanked the author PatrickW for the post: dzsmith (Sat Mar 11, 2023 10:29 am)
Top
 Profile  
 
 Post subject: Re: Fretboard Markers
PostPosted: Sun Mar 12, 2023 5:58 am 
Offline
Koa
Koa

Joined: Tue Jan 15, 2013 10:00 pm
Posts: 980
First name: Josh
Focus: Build
Status: Amateur
I’ve made several padauk guitars with maple binding, end grafts and so on. Straight grained maple has few issues and any dust that it picks up is easily cleaned with naphtha. If there’s curl the runout of the curl can suck up colour in some cases.



These users thanked the author joshnothing for the post: dzsmith (Sun Mar 12, 2023 12:30 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com