Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 1:19 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Tue Oct 19, 2021 9:59 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
I’m planning ahead. I’m not sure how to deal with inside corners.
I will apply Zpoxy to the Mahogany and Maple prior to spraying nitro.
I won’t be able to sand and polish the sharp corner.
I have an idea to apply and build up Zpoxy using a syringe to create a radius and scrape or sand it smooth.
Any other ideas?
Thanks a bunch, Dan


You do not have the required permissions to view the files attached to this post.

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Tue Oct 19, 2021 1:53 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
What kind of finish will you be using? Most will form a nice radius all by its lonesome.....

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Tue Oct 19, 2021 2:03 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
wow7-eyes
Chris Pile wrote:
What kind of finish will you be using? Most will form a nice radius all by its lonesome.....

Chris, I’ll be using Mohawk nitro lacquer

_________________
wah
Wah-wah-wah-wah
Wah



These users thanked the author dzsmith for the post: Chris Pile (Tue Oct 19, 2021 3:18 pm)
Top
 Profile  
 
PostPosted: Tue Oct 19, 2021 3:18 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
I think that would work fine, Dan - depending on the number of coats.

You do plan on breaking the top edge a bit with sandpaper? Just enough to ease the corner?

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: dzsmith (Tue Oct 19, 2021 6:24 pm)
Top
 Profile  
 
PostPosted: Tue Oct 19, 2021 6:25 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Thanks Chris! Yes, I plan to round over the edges.

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Tue Oct 19, 2021 6:51 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
After that sneak peak I'm interested in how it turns out. Keep us posted.

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: dzsmith (Tue Oct 19, 2021 8:05 pm)
Top
 Profile  
 
PostPosted: Sun Dec 05, 2021 4:43 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
The zpoxy filled the sharp corners.
The instrument is ready for lacquer (probably next year].
I used Freeman’s technique of applying zpoxy over the Maple and then spraying a tinted lacquer.
It looks great, with nice chatoyance.


You do not have the required permissions to view the files attached to this post.

_________________
wah
Wah-wah-wah-wah
Wah



These users thanked the author dzsmith for the post (total 2): Durero (Mon Dec 06, 2021 3:52 am) • Chris Pile (Sun Dec 05, 2021 7:39 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com