Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 5:30 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Wed Oct 23, 2019 10:12 am 
Offline
Walnut
Walnut

Joined: Tue Oct 22, 2019 10:55 am
Posts: 6
First name: Ecin
Last Name: Hepler
City: Jasper
State: Ga
Zip/Postal Code: 30143
Country: United States
Focus: Build
Status: Amateur
I am building a Claypool inspired bass and need suggestions on how I should attach the headstock.

https://photos.google.com/photo/AF1QipNuNy8agZwXtVTprTQiMy9lrRyuPEILNJIIg4uq
https://photos.google.com/photo/AF1QipOuOWFMU0lqkLSTgmmZpnyDnSoS1TXCdSnp_1WE

I have a solid oak neck through bass but for some reason didn't think about how to attack a headstock before I glued it all together. In the past I have attacked the headstocks with a scarf joint or a piece of reinforced inlay. Looking for new ideas though maybe someone else has tried making necks in this method. Obviously its alot easier and stronger to make the necks solid one piece but I have been taking scraps and off-cuts of hardwoods for free and turning them into instruments. Appreciate any feedback.


Top
 Profile  
 
PostPosted: Wed Oct 23, 2019 10:25 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
First of all - your links don't work. Second, oak is not usually a good choice for an electric instrument. And third (you already know this), plan your job before starting and trying to fix the problem later.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Wed Oct 23, 2019 6:05 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Oak moves a lot! would be a last choice for me for a neck as well but that's me.

Attaching the headstock? well scarf is the tried and true method. Don't think I'd reinvent the wheel at this point, especially since the body is already attached....

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
PostPosted: Thu Oct 24, 2019 10:24 am 
Offline
Walnut
Walnut

Joined: Tue Oct 22, 2019 10:55 am
Posts: 6
First name: Ecin
Last Name: Hepler
City: Jasper
State: Ga
Zip/Postal Code: 30143
Country: United States
Focus: Build
Status: Amateur
Just trying to turn nothing into something. I cannot afford the price of hardwoods where I live so I get off-cuts from local cabinet shops of low-grade/cheap hardwoods with alot of knots. Trying to come up with a seamless way of making a headstock attach to the neck in 2 pieces without seeing the difference in grain like a scarf joint. If ya can't make it then fake it lmao.


Top
 Profile  
 
PostPosted: Fri Oct 25, 2019 6:31 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Any pin knots etc in your neck will mean a very unstable neck that will most likely twist..... So maybe you may want to save your time and find something else to work with. Maple is available all over the USA fairly cheap and makes fine necks.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
PostPosted: Thu Dec 19, 2019 3:38 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Wed Dec 02, 2015 4:43 pm
Posts: 56
Location: Staten Island, NY
First name: David
Last Name: Schwab
City: Staten Island
State: NY
Zip/Postal Code: 10201
Country: USA
Focus: Build
Status: Professional
I guess you mean a Carl Thompson style bass?


Sent from my iPhone using Tapatalk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com