Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Mar 19, 2024 3:25 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 13 posts ] 
Author Message
PostPosted: Wed Feb 06, 2019 4:44 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
I’ve been using the Stew Mac Gibson fret scale for laying out the fret locations.
I noticed on their website they state the positions were derived by measuring many guitars.
I belive Gibson used the rule of 18 for the fret locations instead of the more exact 17.82 number.
I’m wondering if the intonation is off on the scale?
Any insight?

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Wed Feb 06, 2019 6:39 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5739
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
17.82 is commonly referred to as the rule of 18....

And Gibson has a bunch of scale lengths, the most common of which is 24.75 (or thereabouts).

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: dzsmith (Wed Feb 06, 2019 9:38 pm)
Top
 Profile  
 
PostPosted: Wed Feb 06, 2019 6:45 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
There was an article in AL a few years ago about the three main changes in Gibson's 24-3/4 scale. I'll see if I can find it.



These users thanked the author Freeman for the post: dzsmith (Wed Feb 06, 2019 9:39 pm)
Top
 Profile  
 
PostPosted: Wed Feb 06, 2019 9:39 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Chris Pile wrote:
17.82 is commonly referred to as the rule of 18....

And Gibson has a bunch of scale lengths, the most common of which is 24.75 (or thereabouts).


I believe Gibson used the literal 18 to derive the fret locations?
24.75 / 18 = first fret slot.

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Wed Feb 06, 2019 9:42 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Freeman wrote:
There was an article in AL a few years ago about the three main changes in Gibson's 24-3/4 scale. I'll see if I can find it.

Don’t go to too much trouble Freeman,
I doubt my marking and cutting is very precise.
Just wondering if the scale is based on antique or modern calculations.
Dan

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Wed Feb 06, 2019 10:49 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1963
Location: Rochester Michigan
Chris Pile wrote:
17.82 is commonly referred to as the rule of 18....


That's not quite true from what I understand. 17.82 is the more ideal number which is the 12th root of two. 18 is a close approximation to the more ideal 17.82 but they are distinctly different beasts.

Rule of 18 fretboards intonate differently than 12th root of 2 fretboards. I have a couple clients that vintage-ise new Gibson LPs to vintage spec and the fretboards I cut for them are slotted to a 24.75" scale calculated using the rule of 18 as opposed to the 12th root of two and the frets definitely don't line up between the two.

Some examples.

1st Fret: 1.389 for 2^1/12 but 1.375 for RO18

12th fret: 12.375 vs. 12.285

21st fret: 17.392 vs 17.298

Definitely different beasts and you can hear the difference.

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com



These users thanked the author Andy Birko for the post (total 2): dpetrzelka (Wed May 22, 2019 9:14 am) • dzsmith (Thu Feb 07, 2019 10:20 am)
Top
 Profile  
 
PostPosted: Thu Feb 07, 2019 8:16 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Gibson has used at least 3 different variations of the 24.75" scale... The shortest actually measuring just over 24-9/16" true scale. True scale is double the length from nut to 12th fret. and has no bearing on actual divisions used to obtain scale....

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/



These users thanked the author B. Howard for the post: dzsmith (Thu Feb 07, 2019 10:22 am)
Top
 Profile  
 
PostPosted: Thu Feb 07, 2019 9:33 am 
Offline
Koa
Koa

Joined: Fri Jan 25, 2008 9:55 am
Posts: 982
Location: Traverse City Michigan
Some frets are going to be sharp or flat no matter what method to place them.

As Andy wrote, there is a different placement at the first (and other) fret with different methods of scaling.




Sent from my iPhone using Tapatalk

_________________
Ken



These users thanked the author Ken McKay for the post: dzsmith (Thu Feb 07, 2019 10:21 am)
Top
 Profile  
 
PostPosted: Thu Feb 07, 2019 12:00 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5739
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Quote:
I believe Gibson used the literal 18 to derive the fret locations


They surely weren't stupid enough to take that literally....

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Thu Feb 07, 2019 12:04 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1963
Location: Rochester Michigan
Chris Pile wrote:
Quote:
I believe Gibson used the literal 18 to derive the fret locations


They surely weren't stupid enough to take that literally....


Yes, they were as well as just about everyone else who didn't have a calculator.

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com



These users thanked the author Andy Birko for the post: dzsmith (Thu Feb 07, 2019 2:45 pm)
Top
 Profile  
 
PostPosted: Thu Feb 07, 2019 12:14 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
dzsmith wrote:
Freeman wrote:
There was an article in AL a few years ago about the three main changes in Gibson's 24-3/4 scale. I'll see if I can find it.

Don’t go to too much trouble Freeman,
I doubt my marking and cutting is very precise.
Just wondering if the scale is based on antique or modern calculations.
Dan


Well I couldn't find the article. As I remember one of the changes was going from 18 as the divisor to 17.8xxxxx (whatever the 12th root of 2 is) but there was another change and I don't remember why they did that.

While I was digging in old issues I did run across three or four different articles talking about better fret locations to help deal with string stiffness and all those other little frustrations. Next time I build an electric I may move some frets and compensate the nut...



These users thanked the author Freeman for the post: dzsmith (Thu Feb 07, 2019 2:45 pm)
Top
 Profile  
 
PostPosted: Fri Feb 08, 2019 2:08 pm 
Offline
Koa
Koa

Joined: Fri Jan 25, 2008 9:55 am
Posts: 982
Location: Traverse City Michigan
Guitars are frustrating if you don't just pick a method and stick with it.


Sent from my iPhone using Tapatalk

_________________
Ken


Top
 Profile  
 
PostPosted: Wed May 22, 2019 1:31 am 
Offline
Contributing Member
Contributing Member

Joined: Tue Oct 18, 2005 12:50 pm
Posts: 729
Location: United States
First name: John
Last Name: Lewis
City: Newnan
State: Georgia
Zip/Postal Code: 30265
Country: USA
Focus: Build
Status: Amateur
https://www.youtube.com/watch?v=0yCLckbp8ps

This is a great explanation of scale length - Martin vs. Gibson.

_________________
John Lewis
Wannabe builder owned by 2 crazy dachshunds


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com