Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 5:18 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Fri Jul 27, 2018 2:45 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
I thought I’d share my latest build.
This one is Redwood veneer over Mahogany, Bubinga finger board, gold mop, and plastic binding.
I added a Maple spacer in the body for no particular reason.
The backstrap veneer may be Mahogany, but I’m not certain.
Import hardware, Switchcraft and Bourns electronics.
The body has some hollow chambers to relieve weight.
Finish is nitro lacquer.
The wood and hardware was selected to compliment the plastic cavity cover.
Thanks,
Dan


You do not have the required permissions to view the files attached to this post.

_________________
wah
Wah-wah-wah-wah
Wah



These users thanked the author dzsmith for the post: Ken McKay (Mon Aug 20, 2018 6:32 am)
Top
 Profile  
 
PostPosted: Fri Jul 27, 2018 4:01 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
ME WANT!

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: dzsmith (Fri Jul 27, 2018 4:40 pm)
Top
 Profile  
 
PostPosted: Fri Jul 27, 2018 7:05 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
Very nice Dan. I'm curious about your experience with the veneer - how thick is it, what glue and clamping (vacuum bag?) did you use, any issues with the finish. Is the top flat or does it have some arch?

Also, wow, it looks like the body joint is at the 22nd fret - how much tenon do you have inside?


Top
 Profile  
 
PostPosted: Sat Jul 28, 2018 9:29 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Freeman wrote:
Very nice Dan. I'm curious about your experience with the veneer - how thick is it, what glue and clamping (vacuum bag?) did you use, any issues with the finish. Is the top flat or does it have some arch?

Also, wow, it looks like the body joint is at the 22nd fret - how much tenon do you have inside?

Thanks Freeman!
I believe the veneer is 1/32” thick. I made an MDF clamping caul and used veneer glue.
The caul and body were oversized before gluing. The top is flat. The glue came from veneersupplies.com.
Since the body edge to the neck is flat, I ran the heel the full length of the tenon, all the way to the neck pu cavity. The neck and heel don’t have shoulders against the body edge.
I tapered the neck to match the fretboard taper and cut the neck pocket to match.
This created sort of a wedge that I was able to adjust for a tight fit.
The neck pickup cavity is not very deep, so there’s a good amount of neck tenon in the cavity.
I had a problem with the finish, no matter how I sanded the top there were still some ripples in the veneer. I think it’s the nature of the burl.
The body is three panels glued together like a sandwich. I cut the wiring channels on the back of the top piece so there were no voids under the veneer.
This is my third veneer project and so far no issues with warping. I guess the body is thick enough to prevent it. I don’t over clamp, and I think the glue does not introduce much water. I used a roller to apply the glue as well.
Thanks,
Dan

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Sat Jul 28, 2018 6:00 pm 
Offline
Koa
Koa

Joined: Mon Jul 11, 2005 5:17 am
Posts: 995
Location: United States
City: Tyler
State: Texas
Another killer git from the man in Texas!!



These users thanked the author Glen H for the post: dzsmith (Sat Jul 28, 2018 7:59 pm)
Top
 Profile  
 
PostPosted: Sat Jul 28, 2018 8:17 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Killer, just like all your other guitars, Dan! You have the knack for getting your materials to flow, and compliment each other!

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker



These users thanked the author Alex Kleon for the post: dzsmith (Sun Jul 29, 2018 9:22 am)
Top
 Profile  
 
PostPosted: Sun Jul 29, 2018 6:10 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Thats a nice one!



These users thanked the author Clinchriver for the post: dzsmith (Sun Jul 29, 2018 9:22 am)
Top
 Profile  
 
PostPosted: Tue Jul 31, 2018 10:13 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 755
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
I'm liking the P90 pickup cavity blinding I might have to try that detail out.

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/



These users thanked the author dofthesea for the post: dzsmith (Tue Jul 31, 2018 5:34 pm)
Top
 Profile  
 
PostPosted: Thu Aug 02, 2018 5:49 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 04, 2010 10:02 pm
Posts: 313
First name: Michael
Last Name: Giltzow
City: Boise
State: Idaho
Zip/Postal Code: 83709
Country: usa
Focus: Build
Status: Semi-pro
Dan That's a beauty!

_________________
guitarsbygiltzow.com



These users thanked the author giltzow for the post: dzsmith (Fri Aug 03, 2018 3:47 pm)
Top
 Profile  
 
PostPosted: Thu Aug 02, 2018 7:28 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2422
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
That's a gorgeous guitar! The binding around the pickup recesses is a cool touch.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter



These users thanked the author J De Rocher for the post: dzsmith (Fri Aug 03, 2018 3:47 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Bing [Bot] and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com