Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Last of the PA guitars
http://www.luthiersforum.com/forum/viewtopic.php?f=10123&t=50252
Page 1 of 1

Author:  B. Howard [ Tue Jan 30, 2018 11:01 am ]
Post subject:  Last of the PA guitars

The last Pennsylvania built Howard..... Swamp ash body, 3 pc. set neck, Gotoh hardware, ultra slim fully contoured body, Dimarzios with a 4 way switch, Glow in the dark side markers and more......

Image
Image
Image
Image
Image

Author:  sdsollod [ Tue Jan 30, 2018 11:25 am ]
Post subject:  Re: Last of the PA guitars

Really Nice Brian!

Author:  Freeman [ Tue Jan 30, 2018 11:44 am ]
Post subject:  Re: Last of the PA guitars

Love what the grain is doing on that, Brian. May I ask why a set neck on a tele-clone?

Author:  B. Howard [ Tue Jan 30, 2018 1:38 pm ]
Post subject:  Re: Last of the PA guitars

Set necks are now my standard. Plus body is only 1" thick at the joint so with only 1/4" of body below the neck at the joint a bolt on is a bit precarious. Also sports 22 frets.....play it and you'll never mistake a Fender for one of mine again :D

Author:  Clinchriver [ Thu Feb 01, 2018 4:23 am ]
Post subject:  Re: Last of the PA guitars

Nice one

Author:  SteveSmith [ Fri Feb 02, 2018 8:00 am ]
Post subject:  Re: Last of the PA guitars

Nice and clean looking.

B. Howard wrote:
.....play it and you'll never mistake a Fender for one of mine again :D


I should hope not

Author:  Gsain123 [ Sat Feb 10, 2018 8:22 am ]
Post subject:  Re: Last of the PA guitars

it is fantastic.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/