Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 11:14 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: One or three piece neck?
PostPosted: Wed Jan 17, 2018 10:16 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Oct 24, 2013 9:06 am
Posts: 102
First name: Mark
Last Name: Gammell
State: NE
Country: USA
Ok, I've got the neck blanks for my next two builds (Thanks again, Hibdon Hardwood!), 2 neck-thru solid bodies.

The boards are big enough to make the neck/center section of the body from one piece, but I imagine making it from 3 pieces will give it more stability. Here are my questions:

If I rip it in three pieces, how do I re-orient that middle piece? Rotate it on its axis? flip it end for end, or both?
Thanks again for all the help!

_________________
"Real guitars are for old people, Mr. Marsh."

Eric Cartman


Top
 Profile  
 
PostPosted: Wed Jan 17, 2018 5:11 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Apr 12, 2011 2:05 pm
Posts: 227
First name: Lincoln
Last Name: Goertzen
City: Fort St John
State: BC
Country: Canada
Focus: Build
Status: Amateur
What kind of wood? Might make a difference in the advice. If they're off quarter a bit, I might try for a /\/ appearance at the end grain.


Top
 Profile  
 
PostPosted: Wed Jan 17, 2018 5:59 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Bill Braske wrote:
Ok, I've got the neck blanks for my next two builds (Thanks again, Hibdon Hardwood!), 2 neck-thru solid bodies.

The boards are big enough to make the neck/center section of the body from one piece, but I imagine making it from 3 pieces will give it more stability. Here are my questions:

If I rip it in three pieces, how do I re-orient that middle piece? Rotate it on its axis? flip it end for end, or both?
Thanks again for all the help!


Honduran Mahogany is very stable one piece should work fine. Same thing on the three piece orient them to where it looks its best. Good Luck


Top
 Profile  
 
PostPosted: Thu Jan 18, 2018 10:27 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Oct 24, 2013 9:06 am
Posts: 102
First name: Mark
Last Name: Gammell
State: NE
Country: USA
Huh, I guess I forgot to mention that it's honduran mahogany. One board is quartered really good, the other not as good. I may just do one of each...

_________________
"Real guitars are for old people, Mr. Marsh."

Eric Cartman


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 22 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com