Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Edge routing of a Charvel San Dimas?
http://www.luthiersforum.com/forum/viewtopic.php?f=10123&t=49889
Page 1 of 1

Author:  Code123 [ Wed Nov 01, 2017 6:26 am ]
Post subject:  Edge routing of a Charvel San Dimas?

Hey guys. I'm looking for the correct radius of the edge routing on Charvel San Dimas bodies. I ordered a custom body, and I'm wanting them to route the edges like a San Dimas, but I don't know what size to tell them. Please help. Thanks

Author:  Bill Braske [ Wed Nov 01, 2017 9:27 am ]
Post subject:  Re: Edge routing of a Charvel San Dimas?

It looks like 3/8" to me, but keep in mind that's just from looking at a picture.

Author:  Code123 [ Wed Nov 01, 2017 12:54 pm ]
Post subject:  Re: Edge routing of a Charvel San Dimas?

Bill Braske wrote:
It looks like 3/8" to me, but keep in mind that's just from looking at a picture.

Thanks. That's what I thought it was too.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/