Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Quality of kit instructions
http://www.luthiersforum.com/forum/viewtopic.php?f=10122&t=52852
Page 1 of 1

Author:  BeanJean [ Sat Jan 25, 2020 11:39 am ]
Post subject:  Quality of kit instructions

I’m a beginner mandolin player and novice kit builder. But I’m an experienced wood worker and have a good wood shop.

The first kit I assembled was a Saga mandolin. The instructions didn’t mention fine tuning the carving of the front and back or shaping the tone bars. I would have taken the time to learn how to do these things if they had been included in the instructions. The Saga mandolin i made is easy to tune but the tone is disappointing.

The second kit I assembled is readily available from an individual luthier. It came with written instructions, measured drawings and a cd of photos. This information is inconsistent in thoroughness and detail about the various steps. For instance there is no guidance on how to shape the neck at various fret levels. There is no truss rod so It’s important to get it right. Another example is that the kit includes a beautiful measured drawing of the bridge and a bridge blank but nothing about how to do the carving.

Im going to persevere and do another kit. Which mandolin kits come with excellent instructions? I’m willing to pay for quality and want to produce a good instrument.

Author:  Hesh [ Sun Jan 26, 2020 7:53 am ]
Post subject:  Re: Quality of kit instructions

Hi Emily and welcome to the OLF.

When I started 17 years ago now I got started with a Stewart McDonald dr*adnought kit. The kit, materials and especially the documentation was excellent and what resulted was not only a nice guitar but a completely new career for me.

Anyway the StewMac kits were at least back then very well documented which included literature and get this... a thing called a VHS tape. I remember not even having a VHS any more having moved to CDs so I had to go buy a VHS player for a few bucks since no one wanted them.

Good luck to you and again welcome.

Author:  CarlD [ Sun Jan 26, 2020 6:25 pm ]
Post subject:  Re: Quality of kit instructions

I'm not sure about mandolin kits. You might ask the question on the mando-uke forum below this one. You also should check https://www.mandolincafe.com/forum/. Lots of good mando info there.
As to kit guitar assembly instructions, a couple of books by Bill Cory, "Assembling a Kit Guitar" and another about Martin Kits, really helped me in the beginning. I still refer to them once in a while.
For neck shaping, https://www.liutaiomottola.com/. There is a wealth of info there for someone trying to figure out how to do this stuff.
And of course right here at OLF. You can get lost for days using the search function.
Oh, and a mention should go to http://acousticguitarconstructionforum.com/. The late Ken Cierpilowski, who contributed a lot to this forum and sold kits and tools, created that site and it's being continued by John Parchem. Great instruction info there.
Well that should keep you busy for a while.
Welcome to the asylum bliss .

And can't forget John Hall's http://www.kitguitarsforum.com/. Great source for newbees with instructions and videos. There's a kit mandolin section there too.

Author:  BeanJean [ Tue Jan 28, 2020 1:33 pm ]
Post subject:  Re: Quality of kit instructions

Thank you. That is a wealth of information.

Author:  Freeman [ Tue Jan 28, 2020 9:43 pm ]
Post subject:  Re: Quality of kit instructions

Roger Siminoff used to sell mandolin kits, I got one years ago and his book on building a blue grass mandolin. Ended up with this

Attachment:
Img_0413.jpg


Attachment:
Img_0412.jpg


I'm pretty sure that Roger is out of the kit business but it doesn't hurt to give him a call

https://www.siminoff.net/

Edit to add, Siminoff is one of the great disciple of Lloyd Loar and all of the work he developed on tuning and voicing his instruments. His books and publications describe his methods of tuning each part of the mandolin. I more or less followed it and then had the pleasure of sitting in a class by Roger at a GAL conference where he talked about tap tuning and all the voicing magic. I have a lot of that information if you can't get it from him.

Author:  Hesh [ Thu Jan 30, 2020 6:50 am ]
Post subject:  Re: Quality of kit instructions

Freeman wrote:
Roger Siminoff used to sell mandolin kits, I got one years ago and his book on building a blue grass mandolin. Ended up with this

Attachment:
Img_0413.jpg


Attachment:
Img_0412.jpg


I'm pretty sure that Roger is out of the kit business but it doesn't hurt to give him a call

https://www.siminoff.net/

Edit to add, Siminoff is one of the great disciple of Lloyd Loar and all of the work he developed on tuning and voicing his instruments. His books and publications describe his methods of tuning each part of the mandolin. I more or less followed it and then had the pleasure of sitting in a class by Roger at a GAL conference where he talked about tap tuning and all the voicing magic. I have a lot of that information if you can't get it from him.


That's a real beauty Freeman, Ya done good!!!

Author:  jmanter [ Thu Feb 04, 2021 3:56 pm ]
Post subject:  Re: Quality of kit instructions

I have a Siminoff kit for sale in the classifieds...


Sent from my iPhone using Tapatalk

Author:  BeanJean [ Fri Mar 26, 2021 5:40 am ]
Post subject:  Re: Quality of kit instructions

Do you still have that kit for sale?

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/