Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 6:07 am


All times are UTC - 5 hours


Forum rules


Be Nice to our new friends! Remember, everybody starts somewhere!




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: First Tmer-Need Advice
PostPosted: Sun Dec 25, 2016 8:28 pm 
Offline
Walnut
Walnut

Joined: Sun Dec 25, 2016 8:01 pm
Posts: 2
First name: Edward
Last Name: Talley
City: Cedar Park
State: TX
Zip/Postal Code: 78613
Country: United States
Focus: Build
Status: Amateur
I am ready to get started and learn a little about Luthier. Question for all of you experienced guys... Should I start with a kit build just to learn a little from doing it or just try and build one myself and get my nose bloodied?


Top
 Profile  
 
PostPosted: Sun Dec 25, 2016 8:52 pm 
Offline
Walnut
Walnut

Joined: Thu Sep 03, 2015 5:13 pm
Posts: 31
First name: John
Last Name: Joyce
City: Saint Paul
State: MN
Zip/Postal Code: 55116
Country: usa
Focus: Build
Status: Amateur
From a mildly experienced builder I'll throw in my vote to start with a kit. My first two were kits from KMG that I believe provided me with a rock solid foundation from which I've progressed to scratch building. I had very little woodworking experience and even now I am amazed at how much I've learned in two years. Maybe if you are an experienced woodworker you can jump in right from scratch.

_________________
Having fun learning every day.



These users thanked the author John J for the post: Talley (Mon Dec 26, 2016 6:29 pm)
Top
 Profile  
 
PostPosted: Mon Dec 26, 2016 11:50 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
I'll second the recommendation to start with a kit. I too started with a KMG Kit ( http://www.kennethmichaelguitars.com/kitinfopackage.html ) - it's a great foundation. Ken also has some of the most thorough instructions that not only lay out what you need to do, but what the objective is at each step - something some kits are short on.


Top
 Profile  
 
PostPosted: Mon Dec 26, 2016 12:37 pm 
Offline
Mahogany
Mahogany

Joined: Mon Sep 07, 2015 7:51 pm
Posts: 94
First name: Michael
Last Name: Waszazak
City: Vancouver
State: Wasington
Zip/Postal Code: 98665
Country: USA
Focus: Build
Status: Amateur
I too recommend staring with the KMG kit.


Sent from my iPad using Tapatalk


Top
 Profile  
 
PostPosted: Mon Dec 26, 2016 6:31 pm 
Offline
Walnut
Walnut

Joined: Sun Dec 25, 2016 8:01 pm
Posts: 2
First name: Edward
Last Name: Talley
City: Cedar Park
State: TX
Zip/Postal Code: 78613
Country: United States
Focus: Build
Status: Amateur
Thanks everybody for chiming in. You all confirmed what I was thinking. KMG seems to be the consensus kit so I am ordering now!


Top
 Profile  
 
PostPosted: Mon Dec 26, 2016 7:17 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
If you have any inclination to build more than one, the KMG Mega Mold is the way to go - it has been an incredibly useful tool in my shop. Specifically find it useful for creating side profile templates on new builds.


Top
 Profile  
 
PostPosted: Mon Dec 26, 2016 8:33 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
I would approach this a little differently (altho I did start with kits too).

Buy Cumpiano's book - you will want it in your library anyway. As you read it, ask yourself if you have the tools, wood working experience, patience, to do each of the operations - thicknessing the plates, bending the sides, shaping the neck and bridge...

Then download the free instruction for a StewMac kit (very typical of whats available) and read thru it.

http://www.cumpiano.com/our-guitarmaking-textbook

http://www.stewmac.com/How-To/Online_Re ... tions.html

With a kit the operations that require special tools or that you can really screw up are done for you, but you still get to learn how everything works together (and you'll get a chance to still screw things up). My first home made guitar was a kit and it is still my daily player (its now 11 years old). I built a couple more kits where I purposely ordered them less prepared (LMI calls this "unserviced kits") as I got more confident. I've added tools (and abilities) and am now scratch building basically whatever I want. But I still pick up my old 000 and marvel about the long and interesting road.


Top
 Profile  
 
PostPosted: Mon Dec 26, 2016 10:44 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
I am on # 7. First two were complete kit's, then I slowly made things more complicated with wide purfling, bound fretboards, sunbursts, and I took over jobs like bending, gluing plates, and I just finished my first neck, complete with a Martin volute. So #7 is completely scratch built.

Bill Cory has 2 books on building kits - the better one (IMHO) is the one on building Martin style kits - and they will do a good job of getting you through your first one without a large investment in books. The books are good for kits from KMG, Stew Mac, Blues Creek,etc.

Here is his website and if you can download both books pretty cheaply and just print out what you need at the bench

http://www.kitguitarmanuals.com


Ed


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com