Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 12:04 pm


All times are UTC - 5 hours


Forum rules


Be Nice to our new friends! Remember, everybody starts somewhere!




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Western Redcedar Top
PostPosted: Thu Dec 11, 2014 10:42 am 
Offline
Mahogany
Mahogany

Joined: Thu Dec 09, 2010 9:49 am
Posts: 49
First name: James
Last Name: Strange
City: Carson City
State: Nevada
Zip/Postal Code: 89701
Country: USA
Status: Amateur
I have a very light and very stiff western redcedar top with which I'd like to build a flattop guitar. Are there any general recommendations regarding thicknessing and/or bracing as compared to spruce?

Thank you,

jim

_________________
Mmmm....wood.


Top
 Profile  
 
 Post subject: Re: Western Redcedar Top
PostPosted: Thu Dec 11, 2014 2:21 pm 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
I brace my cedar tops the same as I do redwood or spruce. As far as thickness, there really is no magic number. Its all dependent on what you are going after and how it is going to be used. That said, my tops usually fall in the 100 to 120 thousands range.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
 Post subject: Re: Western Redcedar Top
PostPosted: Thu Dec 11, 2014 3:05 pm 
Offline
Mahogany
Mahogany

Joined: Thu Dec 09, 2010 9:49 am
Posts: 49
First name: James
Last Name: Strange
City: Carson City
State: Nevada
Zip/Postal Code: 89701
Country: USA
Status: Amateur
LanceK wrote:
As far as thickness, there really is no magic number. Its all dependent on what you are going after and how it is going to be used. That said, my tops usually fall in the 100 to 120 thousands range.


Thanks for your answer.

In an attempt to clarify: I was wondering about thicknessing a redcedar top relative to a spruce top of similar stiffness. Should it be on the thicker side of the range compared to a similar spruce top, or just treat it the same?

_________________
Mmmm....wood.


Top
 Profile  
 
 Post subject: Re: Western Redcedar Top
PostPosted: Thu Dec 11, 2014 3:43 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Jul 01, 2011 2:14 pm
Posts: 268
Location: Creedmoor, NC
First name: Tim
Last Name: Benware
City: Creedmoor
State: NC
Zip/Postal Code: 27522
Country: USA
Focus: Build
Status: Professional
FWIW, I thickness my SWRC, WRC, SRedW and RedW top slightly thicker on avg that the spruces.

_________________
"I've been had again"
Tim Benware
Creedmoor, NC


Top
 Profile  
 
 Post subject: Re: Western Redcedar Top
PostPosted: Thu Dec 11, 2014 4:22 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12971
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
I think that Tim and Lance are saying that they do thickness a bit more with WRC - I do too.

For many of us our final thickness is determined by deflection testing compared to our personal databases of past builds and what we believe resulted, etc.

Since new builders often are not set-up for deflection testing a pretty safe thickness for WRC for an OM sized guitar IMO would be around .125" and for a dread*ught a bit thicker or about .130. Lance is experienced so he may go thinner, me too and an OM that I have on the bench at present that I still need to make the neck for is WRC with a final top thickness about about .120".

We all have our thoughts on suitability of WRC too. In my case I like it for finger style guitars and don't like it for dreads and flat picking. I also don't like it in the repair world when bridges lift WRC often gets more torn up than spruce will. But it has it's place, can produce a great sounding instrument, is very pretty IMO, and certainly suitable for guitars.

When installing a bridge the utmost care should be taken when scoring the finish to not cut into the WRC fibers or you may be honoring a bridge lifted warranty claim far sooner than you would have hoped.... We frequently see production instruments where this has happened and it makes the repair more complicated when the top fibers have been scored though by the builder.

It is an amazing wood though. Love the color too!

_________________
Ann Arbor Guitars


Top
 Profile  
 
 Post subject: Re: Western Redcedar Top
PostPosted: Thu Dec 11, 2014 7:49 pm 
Offline
Mahogany
Mahogany

Joined: Thu Dec 09, 2010 9:49 am
Posts: 49
First name: James
Last Name: Strange
City: Carson City
State: Nevada
Zip/Postal Code: 89701
Country: USA
Status: Amateur
Thanks much! :)

jim

_________________
Mmmm....wood.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com