| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Shellac experience http://www.luthiersforum.com/forum/viewtopic.php?f=10122&t=41720 |
Page 1 of 1 |
| Author: | gxs [ Sat Oct 19, 2013 10:00 pm ] |
| Post subject: | Shellac experience |
I have been using shellac as a French polish finish on acoustics, with a 1.5 to 2 # cut, and have found I get better results when I use a swirling motion vs. straight with the grain. Recently I decided to go with the grain just to see what a more orthodox approach would get me, and did about 10 coats ands noticed ridges occurring in the finish, even after establishing a flat base seal. I let it settle a couple of days and while not as pronounced there were still visible ridges. I sanded them down with some 320 grit, and laid down 3 more coats using a swirling motion like I usually do, and it looks muck better. Has anyone else seen this? GS |
|
| Author: | B. Howard [ Mon Oct 21, 2013 6:09 am ] |
| Post subject: | Re: Shellac experience |
Actually application is typically done with a small swirling motion. Pressing or stiffing off is typically done in line with the grain. Here is a link to a FP presentation I did for the Mid Atlantic Luthiers the other year. I do mine a bit different than most other folks. http://www.youtube.com/watch?v=aJ5Zmm9ZKvc |
|
| Author: | gxs [ Sun Nov 10, 2013 8:50 pm ] |
| Post subject: | Re: Shellac experience |
Thanks guys. I went back to swirling, and I am getting much better results, I must have gotten confused with something I read, about finalizing the finish. Regards, GS |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|