| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Help, scratching up binding http://www.luthiersforum.com/forum/viewtopic.php?f=10122&t=40002 |
Page 1 of 1 |
| Author: | OneBearman [ Tue Apr 09, 2013 10:28 am ] |
| Post subject: | Help, scratching up binding |
Hey guys newb here! I'm working on my first build. A Martin OM rosewood laminate kit. I just put the sound box together and binded the guitar. They sent with the kit a white plastic binding. It all looks great but it seems when I sand it that it scratches it. How can I sand or what can I sand with to make it look good? Thanks for the help! - Caleb |
|
| Author: | Mark Maquillan [ Tue Apr 09, 2013 10:52 am ] |
| Post subject: | Re: Help, scratching up binding |
Try using a scraper such as a new razor blade. |
|
| Author: | Tony_in_NYC [ Tue Apr 09, 2013 4:44 pm ] |
| Post subject: | Re: Help, scratching up binding |
After you sand the whole box, go back with a razor blade as Mark recommended. You can turn one into a small scraper like so: http://frets.com/FretsPages/Luthier/Technique/Finish/RazorScrape/razorscrape1.html That will smooth out the binding nicely. |
|
| Author: | OneBearman [ Wed Apr 17, 2013 12:38 pm ] |
| Post subject: | Re: Help, scratching up binding |
Thank you guys for the help! I was trying to complicate something that was really simple! Thanks again- Caleb |
|
| Author: | Tony_in_NYC [ Wed Apr 17, 2013 2:23 pm ] |
| Post subject: | Re: Help, scratching up binding |
That's what this forum is for! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|