Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 3:03 pm


All times are UTC - 5 hours


Forum rules


Be Nice to our new friends! Remember, everybody starts somewhere!




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Thu Jun 21, 2012 9:07 pm 
Offline
Walnut
Walnut

Joined: Mon Jun 18, 2012 6:30 pm
Posts: 13
First name: Jared
Last Name: Schulze
City: Lincoln
State: NE
Zip/Postal Code: 68521
Country: USA
Focus: Build
Status: Amateur
Hey all,
Think I'm going to like it here! Lots of awesome advice and info that I've found so far. I'm fairly new to guitar building(electrics). Right now, all I'm doing is guitar bodies and custom graphics but hopefully will be getting into necks and neck through's sometime soon. Not much time these days with the wife in school and a two year old! I put together old school rock replica guitars. I do plenty of strat style and les paul/sg models but I'm wanting to start offering some Jackson replica kits. Firebird and round horn v's mainly since they don't build these anymore not even through the custom shop. Anyone know of a builder who could supply me with some Jackson replica necks for my kits/bodies???? Specs would be maple necks with ebony boards, 22 jumbo frets, reverse head and reverse sharkfin inlays and binding on the fretboard and headstock. I have a neck that I could supply to use as a template. Any info would be much appreciated. Thanks guys!


Top
 Profile  
 
PostPosted: Tue Jun 26, 2012 1:15 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
I used one of Chris's necks on a tricone - he should be able to help you

http://www.hanalei-moon.com/precarvednecks.html

Also, there are several folks here who have cnc mills (but they may not check the kit subforum). Go to the cnc section and post your question. Possibly in the electric subforum also


Top
 Profile  
 
PostPosted: Thu Jul 05, 2012 9:00 pm 
Offline
Walnut
Walnut

Joined: Mon Jun 18, 2012 6:30 pm
Posts: 13
First name: Jared
Last Name: Schulze
City: Lincoln
State: NE
Zip/Postal Code: 68521
Country: USA
Focus: Build
Status: Amateur
think i've been to that website before. might have to shoot them an email. and thanks for the tip....i'll re-post it in the cnc forum. thank you!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com