Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 9:27 am


All times are UTC - 5 hours


Forum rules


Be Nice to our new friends! Remember, everybody starts somewhere!




Post new topic Reply to topic  [ 47 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Sat Mar 10, 2012 11:40 am 
Offline
Contributing Member
Contributing Member

Joined: Mon Jul 11, 2011 12:43 am
Posts: 1326
Location: chicagoland, illinois
City: chicagoland
State: illinois
Country: usa
Focus: Build
Status: Amateur
this looks like probably the same party:
http://bardsong.weebly.com/index.html


Top
 Profile  
 
PostPosted: Sat Mar 10, 2012 1:00 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Nov 17, 2011 1:01 pm
Posts: 184
First name: Joe
Last Name: Hill
City: Wesley Chapel
State: Fl.
Zip/Postal Code: 33543
Country: United States
Focus: Repair
Status: Amateur
You have heard "if it sounds too good to be true, it usually is." and then, sometimes you will miss the boat if you don't leap. I wonder if it is worth the $150.00 to check it out.
idunno
Joe H.

_________________
Joe

My wife asks me "How many Guitars do you need?"
I reply "When I die count them; thats how many I needed".


Top
 Profile  
 
PostPosted: Sat Mar 10, 2012 7:18 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri May 09, 2008 2:25 pm
Posts: 1954
First name: George
City: Seattle
State: WA
Country: USA
Focus: Build
Status: Amateur
Geez, that's quite a stack of parts. Maybe Martin had a storage unit somewhere and forgot to pay their bill.

_________________
George :-)


Top
 Profile  
 
PostPosted: Sat Mar 10, 2012 9:38 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Nov 17, 2011 1:01 pm
Posts: 184
First name: Joe
Last Name: Hill
City: Wesley Chapel
State: Fl.
Zip/Postal Code: 33543
Country: United States
Focus: Repair
Status: Amateur
Verhoevenc, without a doubt I can see a pro as your self would have no interest in a kit.
I had way too many screw ups on my first build, so I think for me it might be a wise move to take a couple of steps backwards. I should have started with a kit first before a scratch build. There might have been a smaller fire, fewer expletives, a calmer shop and a nice guitar.

_________________
Joe

My wife asks me "How many Guitars do you need?"
I reply "When I die count them; thats how many I needed".


Top
 Profile  
 
PostPosted: Sun Mar 11, 2012 9:03 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
I just ordered a bunch of stuff - necks w/blocks, backs & sides & a top.

I'll let you know how it goes. Should have it by the end of the week.

Kevin Looker

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.


Top
 Profile  
 
PostPosted: Sun Mar 11, 2012 9:36 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
What does a kit like that go for new? He did say that those were seconds, though probably fine for anyone except those who demand the very finest in cosmetics.


Top
 Profile  
 
PostPosted: Sun Mar 11, 2012 9:58 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Nov 17, 2011 1:01 pm
Posts: 184
First name: Joe
Last Name: Hill
City: Wesley Chapel
State: Fl.
Zip/Postal Code: 33543
Country: United States
Focus: Repair
Status: Amateur
jfmckenna wrote:
What does a kit like that go for new? He did say that those were seconds, though probably fine for anyone except those who demand the very finest in cosmetics.


I have seen them start in the neighborhood of $450.00 - $500.00 starting price. It seems to depend on the wood and how far the progression of the build. I would guess around $700.00 but that is an off the wall guess. I just checked (Stew-Mac 5295 Dread. Mahogany, dovetail neck $441.00) I was close.

Joe H.

_________________
Joe

My wife asks me "How many Guitars do you need?"
I reply "When I die count them; thats how many I needed".


Top
 Profile  
 
PostPosted: Sun Mar 11, 2012 10:00 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
Martin kits are "seconds".

There are varying degrees of seconds and the kits that Martin sells are on the better end of the scale - cosmetic blems, off quarter neck grain, pin knots, etc. They sell for between $350 & $450 plus shipping from Martin. You can go to their site for exact pricing.

Kevin Looker

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.


Top
 Profile  
 
PostPosted: Sun Mar 11, 2012 12:22 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri May 09, 2008 2:25 pm
Posts: 1954
First name: George
City: Seattle
State: WA
Country: USA
Focus: Build
Status: Amateur
As Kevin said, all Martin kits are "seconds" and the ones linked here seem to be attractively priced. Personally, I think building a kit (or kits) is a great way for someone to get started. That's what I did and I've taken each subsequent build a step or two closer to scratch. After four guitars I've now done everything but cut the neck joint and I plan to tackle that task on my next one. This approach has worked well for me.

_________________
George :-)


Top
 Profile  
 
PostPosted: Mon Mar 12, 2012 9:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Nov 17, 2011 1:01 pm
Posts: 184
First name: Joe
Last Name: Hill
City: Wesley Chapel
State: Fl.
Zip/Postal Code: 33543
Country: United States
Focus: Repair
Status: Amateur
I will let you know what I think and post pics. I just bought the $150.00 set. I hope I get a real nice set...This is my B-Day present to myself...lol [:Y:]

_________________
Joe

My wife asks me "How many Guitars do you need?"
I reply "When I die count them; thats how many I needed".


Top
 Profile  
 
PostPosted: Tue Mar 13, 2012 9:32 am 
Offline
Koa
Koa
User avatar

Joined: Tue Mar 18, 2008 8:43 am
Posts: 776
Location: Florida
First name: John
Last Name: Killin
Focus: Build
Status: Amateur
I've found on my scratch build that I have easily sunk over $150 on the "guts" of the guitar and hardware. This sounds like a decent deal even if you are only looking at it for the parts.


Top
 Profile  
 
PostPosted: Wed Mar 14, 2012 3:30 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
So I received my parts today.

Overall, I am very happy.

Here are some pics.

The back & side sets have some mineral streaks, a few tiny worm holes, and some grain compression.
Image
Image

The Sitka top has a little chunk out near the to of the rosette.
Image

The necks are all off quarter, a little ding here & there, and one has a glued up heel that is not a great color match.
Image
Image
Image

I feel these will be great for gaining experience without stressing about the materials.

Kevin Looker

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.


Top
 Profile  
 
PostPosted: Fri Mar 16, 2012 12:43 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Jan 27, 2008 5:21 pm
Posts: 251
Location: North Carolina
I just ordered some odds and ends, so I hope I end up as happy as Kevin.

_________________
Greg Hatcher
North Carolina


Top
 Profile  
 
PostPosted: Tue Mar 20, 2012 4:54 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Jan 27, 2008 5:21 pm
Posts: 251
Location: North Carolina
I was just going to report back that I got my package today. And I am happy. I got 3 uncarved neck blanks (One had a comment penciled about rift grain out of spec. I assume the others were similar issues, but looked good to me.); 3 fingerboards; 2 sound boards (looked fine to me, a little color variation), I also got a herringbone rosette and matching bent purfling (he actually sent two sets of the purfling). He told me he would throw in some extras. The extras were: some bone for nuts and saddles; plenty of fretwire for the three necks; 8 EIR head plates, and some of the basic black binding.

looking at Kevin's tonewood purchase, I wished I had asked about that, but I already have plenty for my slow rate of production.

_________________
Greg Hatcher
North Carolina


Top
 Profile  
 
PostPosted: Wed Mar 21, 2012 5:43 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Nov 17, 2011 1:01 pm
Posts: 184
First name: Joe
Last Name: Hill
City: Wesley Chapel
State: Fl.
Zip/Postal Code: 33543
Country: United States
Focus: Repair
Status: Amateur
Like I said previously I ordered the $150.00 guitar, the gear came in today (3 days after ordering)…I am very pleased. Shawn of Bardsong said he would give me some extras; he came through with flying colors. I ordered 1 guitar and with the exception of the neck I received 2 of everything, enough to build 2 guitars. I will get pictures up shortly.
bliss

_________________
Joe

My wife asks me "How many Guitars do you need?"
I reply "When I die count them; thats how many I needed".


Top
 Profile  
 
PostPosted: Wed Mar 21, 2012 7:20 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Nov 17, 2011 1:01 pm
Posts: 184
First name: Joe
Last Name: Hill
City: Wesley Chapel
State: Fl.
Zip/Postal Code: 33543
Country: United States
Focus: Repair
Status: Amateur
Well it is not great photography, but here it is. I think most is self explanitory.

Binding and fret wire
Image

Soundboard back.
Image

Soundboard front.
Image

Kerfing, Braces, Heal and Tail blocks.
There were two packages enough for two guitars.
Image

Back close up. It looks like there are waves in the wood.
Kind of like beach sand after the tide creats ridges.
Image

Back set #1.
Image

Back set #2.
Image

2 sets of sides.
Image

Image

Finger board w/ binding and frets. MOP markers.
Image

Head w/ flaw writen on tape.
Image

I got the tenon and mortis. He also had dovetail for extra money.
Image

Neck and truss rod, there was 2 extra head plates like the one on this head.
Image

Extra fret board.
Image


Image

Well I rumaged through the box before tossing it...Very Glad I did. I found a third bag with 6 ea. Martin Machine heads, 3 ea. 5" bone saddles, 3 ea. bone nuts, 1 rosewood bridge and another 10' of kerfing. (kerfing is in 5"-10" pieces) 2 ea. nice figured head plates and 3 ea. bridge plates.
bliss
I think for A buck fifty I came out pretty good.
Do I need to take better pics?

Thanks,

_________________
Joe

My wife asks me "How many Guitars do you need?"
I reply "When I die count them; thats how many I needed".


Last edited by Joe Hill on Thu Mar 22, 2012 9:18 am, edited 3 times in total.

Top
 Profile  
 
PostPosted: Wed Mar 21, 2012 7:44 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Sep 24, 2009 9:50 am
Posts: 941
Location: Ellicott City, Md - USA
First name: John
Last Name: A
Focus: Build
Status: Amateur
you did awesome !

_________________
It's this new idea from recent decades that everyone gets a participation award. - MUX


Top
 Profile  
 
PostPosted: Wed Mar 21, 2012 8:37 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri May 09, 2008 2:25 pm
Posts: 1954
First name: George
City: Seattle
State: WA
Country: USA
Focus: Build
Status: Amateur
Agreed! Those are good deals. Now get busy and have some fun!

_________________
George :-)


Top
 Profile  
 
PostPosted: Wed Mar 28, 2012 10:39 pm 
Offline
Walnut
Walnut

Joined: Wed Mar 28, 2012 4:29 pm
Posts: 3
First name: shawn
Last Name: spencer
City: blanchard
State: pa
Zip/Postal Code: 16826
Country: usa
Focus: Build
Status: Professional
I'd like to thank everyone for all the nice reviews of my parts and kits. I have a very large supply of these items and am still selling kits from 150-250 and parts priced accordingly. I try to point out all flaws as they do exist but are very workable. Again, thank you all very much.
Eye Candy....
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image


Top
 Profile  
 
PostPosted: Thu Mar 29, 2012 5:25 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Nov 17, 2011 1:01 pm
Posts: 184
First name: Joe
Last Name: Hill
City: Wesley Chapel
State: Fl.
Zip/Postal Code: 33543
Country: United States
Focus: Repair
Status: Amateur
Hey Shawn,

Payday I will be ordering more bro. Awsome deals.

Happy as a Lark,

_________________
Joe

My wife asks me "How many Guitars do you need?"
I reply "When I die count them; thats how many I needed".


Top
 Profile  
 
PostPosted: Fri Apr 06, 2012 12:25 pm 
Offline
Walnut
Walnut

Joined: Mon May 04, 2009 2:46 pm
Posts: 8
OK...here's the problem. I am a woodworker for 30 years...furniture. My son ( age 29) is an avid guitarist (I was when younger)...he has a Martin 00, '64 Epiphone and several electric guitars. I thought it would be cool if I took on the project of building him a nylon string guitar to add to his 'stable'. Seeing what this fella has, I was wondering if there is anything I could use to build my #1 guitar? I wouldn't know what to ask or order... If he doesn't have anything for a nylon...then what would I ask for to get a nice full size steel string? The price is perfect for me to 'start' my new pasttime building guitars...
Please guide me...


Top
 Profile  
 
PostPosted: Sat Apr 07, 2012 11:15 am 
Offline
Mahogany
Mahogany

Joined: Fri Mar 30, 2012 12:33 am
Posts: 48
Focus: Build
Status: Amateur
Is this guy away? I emailed him a couple days ago, no answer. gaah Does he have any short-scale slope dred kits?


Top
 Profile  
 
PostPosted: Sat Apr 07, 2012 3:15 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
SixStringer wrote:
Is this guy away? I emailed him a couple days ago, no answer. gaah Does he have any short-scale slope dred kits?


Don't know where he currently is but I doubt he has short scale slope shoulder dred kits - I don't think Martin makes a short scale, slope shoulder dred.

Kevin Looker

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.


Top
 Profile  
 
PostPosted: Sat Apr 07, 2012 3:17 pm 
Offline
Mahogany
Mahogany

Joined: Fri Mar 30, 2012 12:33 am
Posts: 48
Focus: Build
Status: Amateur
Well, sloped dred would be ok. Classical necks also. Anyway, anyone in touch with him lately?


Top
 Profile  
 
PostPosted: Sat Apr 07, 2012 6:20 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Mar 14, 2010 12:00 pm
Posts: 2020
Location: Utah
SixStringer wrote:
Is this guy away? I emailed him a couple days ago, no answer. gaah Does he have any short-scale slope dred kits?


I e-mailed him when this thread first started and have not received a response.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 47 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com