Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Two Questions re French Polish & labels
http://www.luthiersforum.com/forum/viewtopic.php?f=10122&t=35422		 Page 1 of 1
Author:  sbrown4292 [ Thu Feb 16, 2012 12:22 pm ]
Post subject:  Two Questions re French Polish & labels
Two quick questions:
I want to put a label inside my guitar. Anyone know a source for pre-made blank labels?
Can anyone recommend a good source for French Polish DVD?
Steve
Author:  Freeman [ Thu Feb 16, 2012 3:00 pm ]
Post subject:  Re: Two Questions re French Polish & labels
I make my labels with MS Word and print them on nice beige paper (my company's letter stock). With Word you can do borders, any font you want, import graphic - pretty simple. I put the s/n on each one, save it, then when I build another, bump the s/n and print it out.

As far as FP instructions, there are a bunch of Youtubes, Google is your friend. There is also a dvd at StewMac and I think at LMI also.
Author:  Dan Pennington [ Thu Mar 15, 2012 8:35 pm ]
Post subject:  Re: Two Questions re French Polish & labels
For the best and easiest french polishing process, go to Robbie O'Brien's online classic guitar building course.
http://www.obrienguitars.com/?page_id=84
You can buy all of it or just the finishing section. He does the whole finish in real time.
Author:  johnparchem [ Thu Mar 15, 2012 9:27 pm ]
Post subject:  Re: Two Questions re French Polish & labels
penndan wrote:
For the best and easiest french polishing process, go to Robbie O'Brien's online classic guitar building course.
http://www.obrienguitars.com/?page_id=84
You can buy all of it or just the finishing section. He does the whole finish in real time.


Plus 1 on Robbie's FP section out of the classical guitar course. It is the clearest, most devoid of magic, straight forward method I have watched. You get to watch him FP the entire guitar including all of the tricky areas.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/