| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Fret Saw Blade Search http://www.luthiersforum.com/forum/viewtopic.php?f=10122&t=29750 |
Page 1 of 1 |
| Author: | MarkPDX [ Tue Nov 02, 2010 6:42 pm ] |
| Post subject: | Fret Saw Blade Search |
Anyone know where to find a 7 1/4" to 10" diameter 200 tooth circular saw blade with a 5/8" arbor, for a .026" kerf. Appreciate the info. Mark |
|
| Author: | WaddyThomson [ Thu Nov 04, 2010 11:03 am ] |
| Post subject: | Re: Fret Saw Blade Search |
LMI has .023 and .025" blades at around $48 - 49.00, Shane, at Highmountain Tonewood has a .0445" +/- .0005, blade for about $44, and Stew Mac has a .023" blade for about $75.00. They are all 5/8" arbor size, but only about 6" in diameter. The Stew Mac blade is only thin at the edges, and does not require stiffeners. The LMI and HMT blades are very thin and require blade stiffeners. All are sponsors of this forum, see above. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|