Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Cutting neck joint
http://www.luthiersforum.com/forum/viewtopic.php?f=10122&t=28202
Page 1 of 1

Author:  devincox [ Tue Jul 13, 2010 9:42 pm ]
Post subject:  Cutting neck joint

I am Almost ready to cut the scarf joint and was curious which saw was better for this joint. I have a new sears mitre/chop saw or a nice lynx tenon saw.

Thank you,
Devin

Author:  devincox [ Wed Jul 21, 2010 8:24 am ]
Post subject:  Re: Cutting neck joint

Thank you for the response Filippo. I like using the handsaws more anyways. (c:

Devin

Author:  segovia [ Mon Aug 09, 2010 10:00 am ]
Post subject:  Re: Cutting neck joint

After much experiment I use a 5/8 fine blade in my bandsaw with a homemade jig

John

Author:  devincox [ Mon Aug 09, 2010 12:25 pm ]
Post subject:  Re: Cutting neck joint

John,
I ended up trying several methods. I also messed up the neck blank twice, though unrelated to how I cut it, so I have received some practice cutting them. lol

I dont use a fine blade, but a jig and my bandsaw, make this a painless process. I remove saw marks with 80 grit and then finish it with some 220. I just need more wood now. (c:

Devin

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/