| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Template Routing Bit http://www.luthiersforum.com/forum/viewtopic.php?f=10122&t=27932 |
Page 1 of 1 |
| Author: | jimmysux [ Tue Jun 22, 2010 3:57 pm ] |
| Post subject: | Template Routing Bit |
Can someone recommend a good place online or otherwise to get one? Wanting to shape my guitar after the rough cut. Looking for something about 2 1/4" - 2 3/4" long. |
|
| Author: | JohnAbercrombie [ Tue Jun 22, 2010 4:32 pm ] |
| Post subject: | Re: Template Routing Bit |
I think you might have a tough time finding a 2.75" cutting depth in a standard bit; you can always ride the bearing on the cut surface and work your way to the total cut depth you need. I've got one of these (#45362) and it's a good, smooth cutting bit. The shear cut is a big plus. http://www.toolstoday.com/p-5762-down-shear-face-plunge-template-router-bits-with-upper-ball-bearing.aspx?variantids=9135,0 Cheers John |
|
| Author: | jimmysux [ Wed Jun 30, 2010 12:48 pm ] |
| Post subject: | Re: Template Routing Bit |
Thanks for that! Anyone have any suggestions for a good bit to rout out the tremelo, pickup cavities, control cavities and neck? Also, what is a good one to round the edges of the body? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|