Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Number 2 almost done
http://www.luthiersforum.com/forum/viewtopic.php?f=10122&t=21439
Page 1 of 1

Author:  Stephen Boone [ Thu Mar 12, 2009 6:56 pm ]
Post subject:  Number 2 almost done

I was going to wait until it was completely finished but I took some photos for my mom to see and I decided to post here as well

LMI unserviced flamenco kit with

Western Red Cedar top
monterey cypress back and sides
indian rosewood head plate, bridge, and heel cap
ovankol binding with bw fiber purfling
polyurethane finish

I was going to make my own rosette but the thing I did was not good and this one was so pretty.

The finish is in process and need a couple more coats and then a buffing out.

Thanks for looking!

Image
Image
Image
Image
Image
Image

Author:  George L [ Thu Mar 12, 2009 7:22 pm ]
Post subject:  Re: Number 2 almost done

Lookin' good, Stephen. Nice job!

Author:  Robbie_McD [ Thu Mar 12, 2009 10:16 pm ]
Post subject:  Re: Number 2 almost done

Very nice indeed! And yes, that is a very nice rosette - the R29 I believe....

Author:  WaddyThomson [ Thu Mar 12, 2009 10:50 pm ]
Post subject:  Re: Number 2 almost done

Wow, that is looking great.

Author:  Colin S [ Fri Mar 13, 2009 5:11 am ]
Post subject:  Re: Number 2 almost done

Stephen, that is coming along very nicely. The colour match from that rosette is perfect for the guitar, and the overall look is classy and well executed.

I've only played a Santos Hernandez once but it left me with the impression of a very lively bright sound (my attempts at flamenco were not all that successful!) I hope you will post a sound clip when it's finished.

Colin

Author:  LanceK [ Fri Mar 13, 2009 7:12 am ]
Post subject:  Re: Number 2 almost done

Nice job Stephen!
Its coming along great! [:Y:]

Author:  GHatcher [ Fri Mar 13, 2009 8:52 pm ]
Post subject:  Re: Number 2 almost done

Stephen: That looks great. It seems like just a couple of weeks ago you finished your first.
I hope to have one to post soon. I am at the setup stage, bit I am not sure if mine is worthy.

Author:  Stephen Boone [ Fri Mar 13, 2009 9:48 pm ]
Post subject:  Re: Number 2 almost done

Thanks for all the comment folks!

Quote:
Stephen: That looks great. It seems like just a couple of weeks ago you finished your first.
I hope to have one to post soon. I am at the setup stage, bit I am not sure if mine is worthy.


I laid out the scarf joint for the headpiece on Feb 6 and I lost a week because I broke a side on the bending iron. It made me so mad I bought a bending machine from Blues Creek. :)

Colin,

I do not have any sort of recording equipment. Do you have any suggestions for something inexpensive that will create mp3's? I am not really able to do much with computers beyond check email and this sort of thing so it needs to be simple.

Thanks again everyone-it is nice to hear good feedback.

Author:  Marc [ Sat Mar 14, 2009 7:43 am ]
Post subject:  Re: Number 2 almost done

Stephen, nice work, beautiful guitar.

Author:  Stephen Boone [ Wed Apr 15, 2009 9:04 pm ]
Post subject:  Re: Number 2 almost done

Here are some glamour shots of number 2 all strung up. Positive comments are being accepted at this time. THANKS!!!!!

Negative comments are welcome too.(if you must)


Image

Image

Image


Image

Author:  Robbie_McD [ Wed Apr 15, 2009 9:40 pm ]
Post subject:  Re: Number 2 almost done

Very nicely done!!!!!
Do you have #3 on the way? :D

So...what material did you use for your saddle? Looks pretty dark..... :?:

Author:  Stephen Boone [ Wed Apr 15, 2009 10:23 pm ]
Post subject:  Re: Number 2 almost done

Thanks Robbie,

Number three gets frets tomorrow! Tru-oil is on its way for the finish and I will french polish the top.

The saddle is black horn from LMI. I had the same material for the nut but I boogered it up. I have more black horn to make a new nut coming as well. I wanted this guitar to be as simple and monochrome as possible. She is really playing well right now so it may be a while before I make a new nut.

Author:  Darryl Young [ Thu Apr 23, 2009 10:57 pm ]
Post subject:  Re: Number 2 almost done

Wow Stephen!........another one already??? Your a machine! <smile>

This guitar looks great.....I'm so impressed.

Since you asked.......here is a negative for you........your making me look bad!!!

.....and your started on number 3!!!......

Author:  Alexandru Marian [ Fri Apr 24, 2009 4:55 am ]
Post subject:  Re: Number 2 almost done

That looks excellent and all trim is wisely chosen. I do have a couple suggestions, which are not intended to put you down, but should improve you future ones a bit (imvho)

1. leave some more meat on the headstock above the slots. I like your cut, but it is too short
2. make the nut narrower. Max 5mm. 4.5mm looks best to me.
3. make the heel end narrower.
4. get ridd of the black saddle pfft


Other than that, it looks excellent [clap] [clap] [clap]

Author:  Stephen Boone [ Fri Apr 24, 2009 12:29 pm ]
Post subject:  Re: Number 2 almost done

Thank you Darryl for your kind words.


Alexandru wrote:

Quote:
That looks excellent and all trim is wisely chosen. I do have a couple suggestions, which are not intended to put you down, but should improve you future ones a bit (imvho)

1. leave some more meat on the headstock above the slots. I like your cut, but it is too short
2. make the nut narrower. Max 5mm. 4.5mm looks best to me.
3. make the heel end narrower.
4. get ridd of the black saddle


Number 1. CHECK!

I was trying to make this guitar as light as possible but in the end I do not care for the headstock shape. My current build is much more traditional.

Number 2. CHECK!

I screwed that up early on and am stuck with it. I promise I won't do that again!

Number 3. CHECK!

You are the second person to give that advice and I can see exactly what you mean. I shall improve!

Number 4. CHECK!

In the end I do not like the black horn either. It is just strange.

Thanks for your feed back. It is valuable to me.

Here are a couple of teasers from number 3. Pore filling is happening today and finishing should start soon.


Image

Image

Author:  Robbie O'Brien [ Fri Apr 24, 2009 2:15 pm ]
Post subject:  Re: Number 2 almost done

Very Nice! Will I get to play it in July?

Author:  Stephen Boone [ Fri Apr 24, 2009 4:43 pm ]
Post subject:  Re: Number 2 almost done

Thanks Robbie, I will be sure to bring it along. I am getting sooooo excited about coming to your shop!

Author:  Alexandru Marian [ Sat Apr 25, 2009 2:54 am ]
Post subject:  Re: Number 2 almost done

Hey that looks very nice!
My first guitar had a huge 6mm width nut. I tried too hard not to make it too narrow, or have the 12th too off the joint...
I think the white saddle gives a ...purpose to the bridge and an end to the strings. Without it I can't really understand what's happening in there from a distance.
Perhaps a black saddle would work better with a very light color bridge.

Today I am preping my number 4 :D (and finish the neck for my 5th )

Author:  Darryl Young [ Sat May 02, 2009 12:42 am ]
Post subject:  Re: Number 2 almost done

I guess I'm odd.....I like the black bridge.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/