Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Apr 16, 2024 5:12 pm


All times are UTC - 5 hours


Forum rules


Be Nice to our new friends! Remember, everybody starts somewhere!




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Bridge Finishing?
PostPosted: Fri Oct 31, 2008 9:24 am 
Offline
Mahogany
Mahogany

Joined: Fri Jan 25, 2008 9:08 am
Posts: 99
Does anyone have any suggestions for finishing bridges? For my previous 3 builds, I didn't do anything to finish the bridge other than sanding. I have a rosewood bridge that I intend to use on my latest build that is somewhat light in color and with pronounced grain. I like the grain, but it is kinda light. I wiped some naptha on it and it looked great. But of course when it dries, it looks like it did. Is stain the answer? I'm not sure what color... How can I make it look like it does with the naptha on it... darken it up?


Top
 Profile  
 
 Post subject: Re: Bridge Finishing?
PostPosted: Fri Oct 31, 2008 9:34 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Hi Steve,
The simplest way I know if is to take to to the buffing wheel! That will make it shine like its finished.
That said, I prefer a matte look to my bridges so I got thought the gamut of sanding papers 150, 220, 400, 600 and then 0000 steel wool and that does a pretty good job.

Hope this helps!

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
 Post subject: Re: Bridge Finishing?
PostPosted: Fri Oct 31, 2008 9:37 am 
Offline
Mahogany
Mahogany

Joined: Fri Jan 25, 2008 9:08 am
Posts: 99
But, what about darkening it?


Top
 Profile  
 
 Post subject: Re: Bridge Finishing?
PostPosted: Fri Oct 31, 2008 9:53 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
Take some 100% pure boiled lindseed oil and coat the un polished bridge and allow it to dry out for three days. Do it again and allow a week to dry out, then take it to the buffer. This will give a deep wetted apearance sheen (wetted darker not staind darker)


Top
 Profile  
 
 Post subject: Re: Bridge Finishing?
PostPosted: Fri Oct 31, 2008 9:58 am 
Offline
Walnut
Walnut

Joined: Fri Jan 21, 2005 3:28 am
Posts: 36
Location: United States
Hi Steve,

Have you tried the lemon oil treatment? That may do it.

Try out any other ideas on a spare piece of wood before doing it to a bridge on your guitar. If the guitar is yours and you plan to keep it you might try shellac.

I make my own blond shellac - I can't remember the formula but it is very thin, not like the store bought stuff. In the past I have rubbed a coat of shellac onto wood to improve it's appearance - usually on toys. Again try it on a spare piece of wood. I prefer to make my shellac, but if you only want to try it once or twice, you may be able make the "store bought" shellac work - just mix it down with lots of denatured alcohol. Experiment until it does the job you want.

I would not do this on a guitar I made to sell because the buyer may use lemon oil on the bridge which may react with the shellac.


Top
 Profile  
 
 Post subject: Re: Bridge Finishing?
PostPosted: Fri Oct 31, 2008 10:00 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13050
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Mike Doolin was using Tung Oil at some point, perhaps he still is, to darken dark wood bridges.

I like micro-mesh pads which is just another way to buff out the bridge as Lance mentioned. If you take 20 minutes to go through all of the various pads, in the correct order...... :D , it really shines things up and the shine lasts as well. The micro-mesh pads are also awesome for chucking your wood, bone, or fossilized Mastiff poop bridge pins in a cordless drill and again going through all of the grits.

Here are some pics of the results that micro-mesh pads provide:

Attachment:
DSC01230.jpg


Attachment:
DSCN1874r.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Ann Arbor Guitars


Top
 Profile  
 
 Post subject: Re: Bridge Finishing?
PostPosted: Wed Nov 05, 2008 3:39 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Nov 19, 2007 7:56 am
Posts: 225
Location: United States
I really like the look of a well polished bridge and I agree, the micro-mesh pads are amazing.
Sometimes I'll finish it off on the buffing wheel but often it's fine after the last pad.
I've also used the micro-mesh sandpapers, go on up to 12000 if you want, it will produce
a fantastic finish. If you have a large wheel buffer, there are various color polishing
sticks that can produce a darker look if you desire.....

Best
Bruce

_________________
Bruce Herrmann
"What lies behind us and what lies before us are tiny matters compared to what lies within us."


Top
 Profile  
 
 Post subject: Re: Bridge Finishing?
PostPosted: Thu Nov 06, 2008 12:56 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States
The micromesh can give you a shine good enough to produce a reflection in cocobolo, ebony and some of the rosewoods. But the problem I have with doing this is it wears pretty fast and you get spots that are shiny and spots that are dull. To my eye, that looks pretty bad.

But they look great when they are first applied.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com


Top
 Profile  
 
 Post subject: Re: Bridge Finishing?
PostPosted: Tue Dec 09, 2008 8:12 pm 
Offline
Walnut
Walnut

Joined: Fri Jan 21, 2005 3:28 am
Posts: 36
Location: United States
I agree with you Brock. I prefer a satin sheen from 600 or 800 grit paper.


Top
 Profile  
 
PostPosted: Thu May 14, 2009 1:57 am 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 20, 2009 9:43 pm
Posts: 774
Location: Philadelphia, USA
First name: Michael
Last Name: Shaw
City: Philadelphia
Country: USA
Focus: Build
Status: Semi-pro
uuyy58826 wrote:
本报讯(记者 桑琴)5月12日是汶川大地震一周年纪念日。昨日,记者从湖南卫视获悉,为了纪念在灾难中的死难者,鼓舞更多的人树立重建的希望和信心,湖南卫视“快乐女声”决定全天停止各大唱区的准备工作,为经历过“5·12汶川大地震”的人们送去希望、祝福和信心。

  已经于前日结束报名的“快乐女声”长沙赛区,5月10日正式开唱的南京唱区,正在紧张筹备的成都唱区,以及其他各个合作城市,都在5月12日暂停了各项准备工作,也暂时不接受选手报名。

  在暂停的同时,节目组通过各自的方式向灾区的群众表达自己的祝福。正在成都紧张准备分唱区发布会的导演表示:“虽然今天暂停了‘快女’的报名和准备工作,但节目组的工作人员并没有休息,而是在用我们所有人的行动为灾区加油鼓劲,我们正在组织一个‘微笑四川’的活动,通过报纸和网络征集一千张笑脸,让微笑扫除地震带来的心理阴影,带给灾区的人们以希望、信心、力量。这些笑脸将在成都分唱区发布会上全部展现。”
香港六合彩
香港六合彩
香港六合彩
香港六合彩
香港六合彩

Yes i agree 100%.


Top
 Profile  
 
 Post subject: Re: Bridge Finishing?
PostPosted: Sat Jun 13, 2009 8:38 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 27, 2008 4:10 pm
Posts: 2764
First name: Tom
Last Name: West
State: Nova Scotia
Country: Canada
Focus: Build
Status: Amateur
Steve: Have tried polymerized tung oil on a few. As others have said try it on scrap first and just use one or two coats. I prefer them unfinished and if there is a bit of lighy grain showing, I think it adds a bit of a different look from the traditional all black ebony. Also am not always in favor of ebony bridges ,but that's another story. Good luck.

_________________
A person who has never made a mistake has never made anything!!!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com