| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Cutting Tuning Machine Buttons Part 2- Drilling/Sanding Jig http://www.luthiersforum.com/forum/viewtopic.php?f=10117&t=25084 |
Page 1 of 1 |
| Author: | Chris Paulick [ Fri Dec 18, 2009 7:30 am ] |
| Post subject: | Cutting Tuning Machine Buttons Part 2- Drilling/Sanding Jig |
Here's part 2. |
|
| Author: | Dave Rickard [ Fri Dec 18, 2009 10:16 am ] |
| Post subject: | Re: Cutting Tuning Machine Buttons Part 2- Drilling/Sanding Jig |
Very cool Chris |
|
| Author: | WendyW [ Fri Dec 18, 2009 11:21 am ] |
| Post subject: | Re: Cutting Tuning Machine Buttons Part 2- Drilling/Sanding Jig |
Can someone give me a hint as to why I am unable to view any of the tutorial videas. They appear as a blank box with a small icon in the upper left corner. I used to be able to view them, and then suddenly not. Obviously I am lacking the proper software and need to know what it is. Thanks, Wendy |
|
| Author: | Brock Poling [ Fri Dec 18, 2009 4:20 pm ] |
| Post subject: | Re: Cutting Tuning Machine Buttons Part 2- Drilling/Sanding Jig |
Very cool Chris. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|