Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 11:17 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Binding "Slitter"
PostPosted: Thu Oct 09, 2008 2:00 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 31, 2007 7:17 am
Posts: 1383
Location: Canada
I'm so tickled every time I use this at how well it works, I thought I'd share it.

I basically wanted a way the size bindings (to width) accurately, consistantly, safely and without loss via kerf. The jig I came up with is easy to make & use.

The components are a hardwood block glued to ply ("the bed") and clamped to a bench, a "free" block, a #2 X-ACTO blade, shims & clamps.
Attachment:
slitter1.jpg

You hold the binding against the bed block and slide shims of equal thickness up to it.
Attachment:
slitter2.jpg

Then put the free block over the shims & binding. It will hold down the binding & its left face establishes the location for the slit.
Attachment:
slitter3.jpg

Clamp the blade to the free block so it just touches the binding.
Attachment:
slitter4.jpg

Pull the binding out & check the blade scratch for proper location (& move free block if needed). Then, feeding from the back, the sequence is simple
PULL THROUGH
FLIP END FOR END (to keep scores vertically alligned - THE KEY!)
PULL THROUGH (scoring the opposite side)
restart the binding & TAP THE BLADE (for a little more depth of score)
REPEAT
At some point, the scores will meet in the middle & the binding will seperate.
Attachment:
slitter5.jpg

You can do a 3-pc slit by doing the above BUT the rotate 180 deg SIDEWAYS and repeat BEFORE tapping the blade (ie 2 pairs of scores)
Attachment:
slitter6.jpg

The jig works for solid or laminated ABS and for wood (although wood takes more "taps"). This is .300" wide curly maple slit to .200" & .100"


You do not have the required permissions to view the files attached to this post.

_________________
Dave
Milton, ON



These users thanked the author Dave Stewart for the post (total 2): Colin North (Thu Jul 25, 2019 6:02 pm) • Kevin Mason (Sat Sep 27, 2014 9:48 am)
Top
 Profile  
 
 Post subject: Re: Binding "Slitter"
PostPosted: Fri Oct 31, 2008 9:13 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Jun 21, 2008 10:58 am
Posts: 2774
Location: Tampa, Florida USA
Thanks Dave. I like it. I'll be using it for sure.


Top
 Profile  
 
 Post subject: Re: Binding "Slitter"
PostPosted: Sat Nov 01, 2008 8:50 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12971
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Very clever Dave and great pics and step-by-step too! [:Y:] [clap] [clap] [clap] [clap] [clap]

_________________
Ann Arbor Guitars


Top
 Profile  
 
 Post subject: Re: Binding "Slitter"
PostPosted: Mon Nov 03, 2008 9:04 pm 
Offline
Koa
Koa

Joined: Sun Sep 04, 2005 3:20 pm
Posts: 632
Location: United States
Dave

Brilliantly simple and timely. I was wrestling with this task last night and messed up a binding. Heading down to the cellar 5am tomorrow morning armed with this idea - thanks for sharing it.


Top
 Profile  
 
 Post subject: Re: Binding "Slitter"
PostPosted: Sat Nov 08, 2008 9:45 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Jan 28, 2007 4:43 am
Posts: 219
Location: United States
really cool. i am totally into the simple jigs. big jigs are nice, but i prefer the simplicity and closeness of working things by hand and with simple jigs like this.

thanks


Top
 Profile  
 
 Post subject: Re: Binding "Slitter"
PostPosted: Fri Feb 13, 2009 6:38 pm 
Offline
Walnut
Walnut

Joined: Tue Feb 19, 2008 9:27 pm
Posts: 32
Location: Melbourne, Australia
Thanks to you Dave, I was able to make myself a nice binding strip yesterday.

Image

Cheers & thanks Hip.


Top
 Profile  
 
 Post subject: Re: Binding "Slitter"
PostPosted: Thu Feb 19, 2009 5:54 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Jan 13, 2009 11:39 am
Posts: 205
Location: Bonney Lake, WA.
Focus: Build
Status: Amateur
Very nice. Thanks for putting the pictures up for everyone to see.
Chuck


Top
 Profile  
 
 Post subject: Re: Binding "Slitter"
PostPosted: Mon Apr 13, 2009 3:23 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon Apr 06, 2009 8:17 pm
Posts: 142
First name: Daniel
Last Name: Green
City: Milford
State: Ohio
Zip/Postal Code: 45150
Country: U.S of A
Focus: Build
Status: Amateur
Thank you very much for sharing, I look forward to learning here at OLF


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com