Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 3:47 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Tue Jan 29, 2008 12:42 pm 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Here is a handy jig that will allow you to cut purlfings strips from abalam blanks.

Make sure to wear safety glasses, and a respirator. The dust from this stuff is NASTY! :(


_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Tue Jan 29, 2008 9:16 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Fri Jan 25, 2008 11:32 pm
Posts: 82
Location: Nova Scotia, Canada
Focus: Build
Status: Amateur
Lance...I assume the jig is running on drawer slides? Also, where do you get the diamond cutting wheels - are they speciality items or can you get them at any hardware store that carries Dremel supplies?

Thanks for the tutorial, and the new OLF is great.

_________________
Jamie M


Top
 Profile  
 
PostPosted: Tue Jan 29, 2008 9:37 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12971
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Excellent Lance and nice to see the emphasis on safety and health too!

On a side note the sound of that thing when you turned it on reminded me of my ex nagging at me........... :( :? :lol:

_________________
Ann Arbor Guitars


Top
 Profile  
 
PostPosted: Wed Jan 30, 2008 12:38 am 
Offline
Koa
Koa
User avatar

Joined: Tue Mar 14, 2006 4:08 pm
Posts: 1018
Location: Denver, Colorado
Cool. Great jig, Lance!

_________________
Mike

"The Dude abides. I don't know about you but I take comfort in that. It's good knowin' he's out there. The Dude. Takin' 'er easy for all us sinners. Shoosh." The Stranger


Top
 Profile  
 
PostPosted: Wed Jan 30, 2008 2:21 am 
Offline
Koa
Koa
User avatar

Joined: Thu Aug 25, 2005 4:49 pm
Posts: 1209
Location: Ukiah, CA
Looks very handy and easy to make and use. Great jig, Lance.

_________________
Ken Franklin
clumsy yet persistent
https://www.kenfranklinukulele.com


Top
 Profile  
 
PostPosted: Wed Jan 30, 2008 2:23 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Mar 26, 2007 6:42 am
Posts: 564
Location: United States
First name: Stephen
Last Name: Ziegenfuss
City: Jackson
State: MI
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
I was tempted to be sarcastic about your instructional ability :), but it really is a nifty little way to do that...

_________________
www.ziegenfussguitars.com


Top
 Profile  
 
PostPosted: Thu Jan 31, 2008 1:11 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 31, 2007 7:17 am
Posts: 1383
Location: Canada
Lance, great turorial! Not sure of the kerf of the diamond blade,but the yeild looks like 27 pcs from (I assume) a sheet (2 3/4 x 4 3/4)?? This looks about 1/3 the cost of buying pre-cut straight pcs. Is that about right?

_________________
Dave
Milton, ON


Top
 Profile  
 
PostPosted: Tue Feb 05, 2008 10:22 am 
Offline
Walnut
Walnut

Joined: Wed Jun 13, 2007 7:04 am
Posts: 17
Location: Narberth, PA USA
Hi, Lance (and any others who'd care to comment),

I curious about how you cut curved ablam strips for rosettes and such.

I've recenly tried using a router (laminate trimmer), a circle cutting jig and a 1/16 inch down-cut spiral bit. This cutter probably wastes a lot of material...and the stuff's not cheap.

Any input would be appreciated!
Lofton


Top
 Profile  
 
PostPosted: Tue Feb 05, 2008 11:41 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
LoftonHarris wrote:
Hi, Lance (and any others who'd care to comment),

I curious about how you cut curved ablam strips for rosettes and such.

I've recenly tried using a router (laminate trimmer), a circle cutting jig and a 1/16 inch down-cut spiral bit. This cutter probably wastes a lot of material...and the stuff's not cheap.

Any input would be appreciated!
Lofton


Hi Loften,
That is how I do it as well. I see one advantage, that is I can make the circle any size I want as apposed to being locked in to a premade diameter.
I think if I ever settle in on a standard rosette size I will have someone cnc cut me a bunch of curved strips. For now I like the freedom.
Oh yeah, I also found that I can do a smaller ring inside this larger ring for my 0-12 model.


You do not have the required permissions to view the files attached to this post.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Tue Feb 05, 2008 12:04 pm 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Dave Stewart wrote:
Lance, great turorial! Not sure of the kerf of the diamond blade,but the yeild looks like 27 pcs from (I assume) a sheet (2 3/4 x 4 3/4)?? This looks about 1/3 the cost of buying pre-cut straight pcs. Is that about right?


Hi Dave,
To be honest, I cant remember how many strips I got per sheet.
I think the sheets were 5.5 X 9.5 though.
Either way its MUCH cheaper than buying precut ;)

Jamie, the diamond wheels were found at Lowes.
They were 15.00 each. I found them also on eBay MUCH cheaper! :mrgreen:

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com