Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 4:01 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Fri Sep 22, 2017 2:10 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Dec 01, 2006 6:44 pm
Posts: 471
Location: Australia
First name: Allen
Last Name: McFarlen
City: Mt. Sheridan
State: Qld.
Zip/Postal Code: 4868
Country: Australia
Focus: Build
Status: Professional
I have a Mach3 and Warp9 ESS setup on my router for the last couple of years, and while it did the job.....sort of, the look ahead/trajectory planner is far from adequate, as many of you would know.

I asked several times on the Warp9 forum if Mach4 and their smooth stepper was ready for prime time, and they finally came back with a yes for router / mills as long as I wasn't wanting to thread with it.

So I bit the bullet and installed the most recent stable version of the program and ESS plug-in.

The install is pretty straight forward, but the configuring is like most of this stuff. A pain in the arse. Lot's of watching YouTube tutorials, and trying to get all those check boxes ticked in the right place. Asking questions and trying again.....But finally everything seems to be configured and working.

And the best news is that a file that I cut a few days ago with Mach3 that was just a plain disaster because it couldn't work out how to follow the curve of a uke template without starting and stopping every few millimetres now with Mach4 just zips around the shape smooth as at 3000mm/minute.

So if you are wondering if it's worth swapping from Mach3 to Mach4, it's a yes from me.

_________________
Allen R. McFarlen
Barron River Guitars & Ukuleles
Facebook
Cairns, Australia



These users thanked the author Allen McFarlen for the post: dpetrzelka (Fri Sep 22, 2017 9:09 am)
Top
 Profile  
 
PostPosted: Fri Sep 22, 2017 1:15 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed Jan 08, 2014 7:58 pm
Posts: 272
First name: Leo
Last Name: Pedersen
City: Bowen Island
State: British Columbia
Zip/Postal Code: V0N 1G2
Country: Canada
Focus: Build
Status: Amateur
I'm liking Mach4 much better than Mach3. I'm also using ESS and I think threading was added to the latest ESS plugin.

I'm having to face learning how to program my tool changer in LUA now. Wish me luck!

Leo


Top
 Profile  
 
PostPosted: Fri Sep 22, 2017 3:19 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Dec 01, 2006 6:44 pm
Posts: 471
Location: Australia
First name: Allen
Last Name: McFarlen
City: Mt. Sheridan
State: Qld.
Zip/Postal Code: 4868
Country: Australia
Focus: Build
Status: Professional
I have an ATC spindle, but only use it with a quick release valve set up, as it's far to finicky in letting a tool go automatically.

_________________
Allen R. McFarlen
Barron River Guitars & Ukuleles
Facebook
Cairns, Australia



These users thanked the author Allen McFarlen for the post: Gasawdust (Tue Oct 31, 2017 8:01 pm)
Top
 Profile  
 
PostPosted: Fri Sep 22, 2017 10:44 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Nov 24, 2008 12:17 pm
Posts: 1161
City: Escondido
State: CA
Zip/Postal Code: 92029
Country: USA
Focus: Build
Status: Semi-pro
I was just talking to someone today about Mach 3 and thinking to myself, "whatever happened to Mach 4?" I assumed there was some real problem with it, as I keep seeing Mach 3 being used and sold. Then, BANG! Someone posts about Mach 4!

I know Andy Birko is a fan of UNCNC, but I just couldn't get it to work. When the developer provided no assistance I asked questions on CNCZone. Apparently, even though he wouldn't read or respond to my emails, he was quick to respond there. Only, in an unhelpful way.

So I've been plugging along with Mach 3. Good to hear that Mach 4 is ready for prime time.


Top
 Profile  
 
PostPosted: Tue Oct 31, 2017 6:04 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed Jan 08, 2014 7:58 pm
Posts: 272
First name: Leo
Last Name: Pedersen
City: Bowen Island
State: British Columbia
Zip/Postal Code: V0N 1G2
Country: Canada
Focus: Build
Status: Amateur
I was able to program my ATC in Mach4 with much less difficulty than I expected.

The Mach4 forum is a fantastic source of help.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com