***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Apr 19, 2024 5:40 am


Board index » CNC and Lutherie

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
dholzric
 Post subject: Making Vacuum Table
PostPosted: Tue Jan 21, 2014 10:34 am 
Offline
Walnut
Walnut

Joined: Wed Jul 22, 2009 10:14 pm
Posts: 20
Location: Austin TX
First name: Dan
Last Name: Holzrichter
City: austin
State: tx
Zip/Postal Code: 78737
Country: us
Focus: Build
Status: Semi-pro
Is there a minimum volume necessary for the internal volume on a vacuum table? I was looking at the one that Donek has on their web site but I don't want to take up very much of my z axis for the vacuum table. http://www.youtube.com/watch?v=fOrkvPF0pro

I was thinking about creating it with 3 layers of 1/2" mdf with the middle one cutout below the holes in the top sheet.
Top
 Profile  
 
Chris Pile
 Post subject: Re: Making Vacuum Table
PostPosted: Tue Jan 21, 2014 12:10 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5756
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
No help here, Danny!
Had to say HI!

_________________
"Act your age, not your shoe size" - Prince
Top
 Profile  
 
Andy Birko
 Post subject: Re: Making Vacuum Table
PostPosted: Tue Jan 21, 2014 7:19 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1963
Location: Rochester Michigan
Here's my vacuum table: viewtopic.php?f=10106&t=38998&p=513909&hilit=vacuum+table#p513909

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com
Top
 Profile  
 
Durero
 Post subject: Re: Making Vacuum Table
PostPosted: Wed Jan 22, 2014 12:40 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed Jan 08, 2014 7:58 pm
Posts: 275
First name: Leo
Last Name: Pedersen
City: Bowen Island
State: British Columbia
Zip/Postal Code: V0N 1G2
Country: Canada
Focus: Build
Status: Amateur
Mdf may not be air tight enough for use as a vacuum table.

idunno


These users thanked the author Durero for the post: mike sandor (Sun Jan 26, 2014 5:09 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Board index » CNC and Lutherie

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 13 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com