Official Luthiers Forum! • View topic

Board index » CNC and Lutherie

All times are UTC - 5 hours

Router or Spindle?

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

theguitarwhisperer

Post subject: Router or Spindle?

Posted: Mon Aug 26, 2013 3:10 am

Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional

Which is better?

I've decided that if I'm going to spend $3000 or so on a milling machine to do just pearl cutting but it only goes to 11000 RPM then I might as well find a sturdy platform and fill it with nice components for about $6000. Twice the money, but 24X48 inches worth of work space gives it ten times the capability. I could all things guitar related, from manufacturing necks and bodies, cutting fancy/schmancy rosettes, to cutting my "S"'s and possibly making some hardware.

So if I want to machine bridges out of brass components as well, then I need to know what will do it.

Anybody doing stuff like that?

_________________
Old growth, shmold growth!

Top

Andy Birko

Post subject: Re: Router or Spindle?

Posted: Mon Aug 26, 2013 8:40 am

Contributing Member

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1963
Location: Rochester Michigan

It seems you've taken the red pill. I think there's quite a bit more research for you before you pull the trigger. Here's a thread I started when I was at a similar point: viewtopic.php?f=10106&t=30245&hilit=taking+the+plunge#p401309

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com

Top

theguitarwhisperer

Post subject: Re: Router or Spindle?

Posted: Mon Aug 26, 2013 11:06 am

Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional

Thanx!

_________________
Old growth, shmold growth!

Top

Bob Garrish

Post subject: Re: Router or Spindle?

Posted: Tue Aug 27, 2013 5:40 pm

Brazilian Rosewood

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional

For your answer, though: spindle. They're so cheap now, on eBay or though AutomationTechnologies, that I can't see any good reason not to get one.

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services

These users thanked the author Bob Garrish for the post: theguitarwhisperer (Tue Aug 27, 2013 6:42 pm)

Top

theguitarwhisperer

Post subject: Re: Router or Spindle?

Posted: Tue Aug 27, 2013 6:42 pm

Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional

They look like they can achieve higher RPM's in a smaller package, too.

_________________
Old growth, shmold growth!

Top

Bob Garrish

Post subject: Re: Router or Spindle?

Posted: Wed Aug 28, 2013 4:31 pm

Brazilian Rosewood

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional

theguitarwhisperer wrote:

They look like they can achieve higher RPM's in a smaller package, too.

The main difference between a router and a spindle is the motor type. Spindles use three phase brushless motors, which are much more efficient than the universal motors used in routers (ie: lighter, stronger, faster). Also MUCH quieter.

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services

Top

Ken McKay

Post subject: Re: Router or Spindle?

Posted: Sat Sep 21, 2013 8:54 pm

Koa

Joined: Fri Jan 25, 2008 9:55 am
Posts: 982
Location: Traverse City Michigan

error, wrong thread.

_________________
Ken

Top

Page 1 of 1

[ 7 posts ]

Board index » CNC and Lutherie

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: