What are you doing Hesh? Chipping Tony's Hard work Shame on you ........Just kidding
bud I read your post right 
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| NEW Stew-Mac e-news letter http://www.luthiersforum.com/forum/viewtopic.php?f=10102&t=8935 |
Page 1 of 1 |
| Author: | Kim [ Fri Oct 20, 2006 7:39 am ] |
| Post subject: | |
Thanks Hesh and Stewmac of course. Cheers Kim |
|
| Author: | JBreault [ Fri Oct 20, 2006 7:41 am ] |
| Post subject: | |
Thanks for the heads up Hesh. |
|
| Author: | Michael Dale Payne [ Fri Oct 20, 2006 8:04 am ] |
| Post subject: | |
What are you doing Hesh? Chipping Tony's Hard work Shame on you ........Just kidding bud I read your post right
|
|
| Author: | Serge Poirier [ Fri Oct 20, 2006 8:26 am ] |
| Post subject: | |
Thanks Hesh and Stew Mac! 
Never too much info on lutherie! 
|
|
| Author: | Dave Rector [ Fri Oct 20, 2006 8:52 am ] |
| Post subject: | |
Thanks Hesh!
|
|
| Author: | Dave Anderson [ Fri Oct 20, 2006 1:33 pm ] |
| Post subject: | |
Yes,Thanks Hesh! you too Stewart MacDonalds! |
|
| Author: | Anthony Z [ Fri Oct 20, 2006 2:01 pm ] |
| Post subject: | |
Hey Jim, where have you been hiding? Sorry to hear Guitarmaker lost you as its editor. Thank you for making the last year of issues great reads. Hesh thanks for the heads up. Man I could have used the tip on straightening a neck a few months ago before I snapped a truss rod  |
|
| Author: | Billy T [ Fri Oct 20, 2006 4:42 pm ] |
| Post subject: | |
Thanks! After being on the OLF so much I know everthing there is to know about building guitars, so I won't really need it!
Cool stuff! This should come in handy! |
|
| Author: | Brock Poling [ Sat Oct 21, 2006 3:27 am ] |
| Post subject: | |
[QUOTE=Billy T] so I won't really need it! [/QUOTE]
I don't know ... these are usually worth their weight in gold for me. Lots of clever ideas. |
|
| Author: | Anthony Z [ Sat Oct 21, 2006 5:09 am ] |
| Post subject: | |
Jim sorry to hear about your health problems. You did make an impact. Often little feedback is a sign you are doing a great job! You did a great job in my books. Get well and start building! |
|
| Author: | crazymanmichael [ Sat Oct 21, 2006 7:46 am ] |
| Post subject: | |
the trade secrets used to be a regular feature of their cattle dog, but for some reason they dropped it. the old ones are available in book form from stew mac. a very useful resource if you do repair work. |
|
| Author: | rich altieri [ Sat Oct 21, 2006 4:07 pm ] |
| Post subject: | |
Thanks for the heads up Hesh, will register immediately |
|
| Author: | Todd Rose [ Sun Oct 22, 2006 4:57 am ] |
| Post subject: | |
Thanks, Hesh, and thanks to Stewmac as well. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|