Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Burton's goods- Brazilian fingerboards !! Wed. afternoon-
http://www.luthiersforum.com/forum/viewtopic.php?f=10102&t=39734
Page 2 of 3

Author:  CharlieT [ Sat Mar 16, 2013 3:53 pm ]
Post subject:  Re: Burton's goods-

Burton LeGeyt wrote:
I'm surprised no one has snapped up the Tucarensis, I thought that would go first!

Burton - I've been trying to resist that Tuc set but I'm afraid I've finally succumbed. I'll take it... [headinwall] :mrgreen:

Author:  Burton LeGeyt [ Sat Mar 16, 2013 3:57 pm ]
Post subject:  Re: Burton's goods- MORE ADDED SATURDAY 3PM EST, see end of

Charlie, you know what they say about resistance.....
I think you made a good choice! I'll pm this evening.
Thanks!

Author:  Matthew Jenkins [ Sat Mar 16, 2013 4:28 pm ]
Post subject:  Re: Burton's goods- MORE ADDED SATURDAY 3PM EST, see end of

Burton -

I'll take the extra Koa strips and I'll also have the Coco pieces and that's me done. If I say I'll have something else - just ignore me.

Many thanks
Mat

Author:  Clinchriver [ Sat Mar 16, 2013 6:22 pm ]
Post subject:  Re: Burton's goods- MORE ADDED SATURDAY 3PM EST, see end of

Burton LeGeyt wrote:
Steve, you've got them. I've been selling quite a few of those pin sets lately.

Clinch, I very well may. What is your minimum thickness requirements?


.85, .9 ready to bend is fine.

Author:  Burton LeGeyt [ Sun Mar 17, 2013 1:15 pm ]
Post subject:  Re: Burton's goods- MORE ADDED SATURDAY 3PM EST, see end of

Clinch, I think I've got you covered, I sent a pm

Filippo, thanks for those pics! The fingerboard does look nice. I agree the wood is dark and HARD. No question about that, pretty perfect FB wood in fact.

PM's have gone out to everyone who has responded so far. Still a few things left and don't hesitate to ask for stuff that is not listed, chances are I've got it or I can steal it from Don and sell it to you.

Author:  Darrel Friesen [ Sun Mar 17, 2013 7:38 pm ]
Post subject:  Re: Burton's goods- MORE ADDED SATURDAY 3PM EST, see end of

If Mat doesn't want the Koa bindings, I'll take them Burton.

Author:  Chris Ensor [ Sun Mar 17, 2013 8:05 pm ]
Post subject:  Re: Burton's goods- MORE ADDED SATURDAY 3PM EST, see end of

Do you have any sets of that beautiful brain sapele? Or any Madagascar rosewood you're willing to part with?

Author:  Don Williams [ Sun Mar 17, 2013 8:06 pm ]
Post subject:  Re: Burton's goods- MORE ADDED SATURDAY 3PM EST, see end of

Heh heh.....clever Burton.
But do you see this? Maybe I should steal all your stuff!

There's more than one way to hide something so someone can see it...like highlighting the text...

Author:  Burton LeGeyt [ Sun Mar 17, 2013 8:21 pm ]
Post subject:  Re: Burton's goods- MORE ADDED SATURDAY 3PM EST, see end of

Don, I was wondering if you would see that........

Darrel,

I think I am out of koa bindings for now. If I decide to cut more I will certainly give you first dibs.

Chris, I do have a few large boards of the brain sapele left to cut but it is in CT and I won't get to it for the swap. If you are interested I can contact you when I do cut them.

As for Madagascar sets, I'm not really selling what I've got. That's one thing I think I am going to hang on to - Sorry.

Author:  Chris Ensor [ Sun Mar 17, 2013 9:02 pm ]
Post subject:  Re: Burton's goods- MORE ADDED SATURDAY 3PM EST, see end of

Would you be interested in selling a whole board of the brain sapele? If not, please contact me when you get the sets cut.

Author:  Burton LeGeyt [ Mon Mar 18, 2013 7:06 am ]
Post subject:  Re: Burton's goods- MORE ADDED SATURDAY 3PM EST, see end of

Chris,

I'm not inclined to sell a whole board but I will let you know once I have it cut and figure out just what the yield will be. Not sure when that will be but I will keep it in mind.

Don,
I would be more worried if you knew where I lived!!!!!

Author:  StevenWheeler [ Tue Mar 19, 2013 6:39 am ]
Post subject:  Re: Burton's goods- MORE ADDED SATURDAY 3PM EST, see end of

Hey Burton,

Can I talk you out of those two EIR boards for $75?

Steve

Author:  Burton LeGeyt [ Tue Mar 19, 2013 8:25 am ]
Post subject:  Re: Burton's goods- MORE ADDED SATURDAY 3PM EST, see end of

Steven, let me think about it...

OK, I thought about it. Sure! That sounds fine. I hope you can put them to some good use.
I'll pm tonight with shipping, payment etc... details.
Anything else you need? Any buttons or pins?

Filippo, that at least I would imagine. I figure 1.5 bf per set being conservative on the resaw so maybe even 200/bf.

Katalox and Sapele are all that is left!

Author:  Burton LeGeyt [ Wed Mar 20, 2013 12:20 pm ]
Post subject:  Re: Burton's goods- MORE ADDED SATURDAY 3PM EST, see end of

Always have buttons and pins, in pretty much everything! I guess I assume people know that....

Got a request for some Brazilian fingerboards and had a few I could part with. Nothing super AAA but all should make a decent board. Some cracks, pinholes, grain swirls etc... but workable. Most are also thick enough to cut bridges from. All with level out at .25.
I'll list them below. The original interested party had first dibs, so some are sold already-

Group 1
all pcs. $25 per.
A, B, C, D SOLD

Attachment:
OLF-set-1-fronts.jpg


Attachment:
OLF-set-1-backs.jpg


Attachment:
OLF-set-1-close.jpg


Group 2
all pcs. $35 per.
E, F,G SOLD

Attachment:
OLF-set-2-fronts.jpg


Attachment:
OLF-set-2-backs.jpg


Attachment:
OLF-set-2-close.jpg


continued below....

Author:  Burton LeGeyt [ Wed Mar 20, 2013 12:22 pm ]
Post subject:  Re: Burton's goods- MORE ADDED SATURDAY 3PM EST, see end of

Group 3 (the nicest ones, obviously)
all pcs. $45 per.
H, I, J, K SOLD

Attachment:
OLF-set-3-fronts.jpg


Attachment:
OLF-set-3-backs.jpg


Attachment:
OLF-set-3-close.jpg


All Brazilian is US shipping only-
Sorry to our International friends, I know it is a tease.

Author:  James Ringelspaugh [ Wed Mar 20, 2013 12:25 pm ]
Post subject:  Re: Burton's goods- Brazilian fingerboards !! Wed. afternoo

FYI folks, I have laid claim to the brainy sapele...

Author:  Joe Sustaire [ Wed Mar 20, 2013 12:39 pm ]
Post subject:  Re: Burton's goods- Brazilian fingerboards !! Wed. afternoo

I'll take fretboard A, if it's still available.

Joe

Author:  Burton LeGeyt [ Wed Mar 20, 2013 1:04 pm ]
Post subject:  Re: Burton's goods- Brazilian fingerboards !! Wed. afternoo

You got it Joe-

Author:  Rod True [ Wed Mar 20, 2013 2:00 pm ]
Post subject:  Re: Burton's goods- Brazilian fingerboards !! Wed. afternoo

Hi Burton

Sent a PM, but thought I should post to the tread.

What would shipping be for the Katalox to 98264?
Would you take $30 for it?

Author:  Tony_in_NYC [ Wed Mar 20, 2013 4:42 pm ]
Post subject:  Re: Burton's goods- Brazilian fingerboards !! Wed. afternoo

James Ringelspaugh wrote:
FYI folks, I have laid claim to the brainy sapele...


You wont fool anyone if you relist it in you thread for a higher price. However, if you list it at a lower price, I would be interested in it! laughing6-hehe

Author:  James W B [ Wed Mar 20, 2013 6:56 pm ]
Post subject:  Re: Burton's goods- Brazilian fingerboards !! Wed. afternoo

I`ll take board K if it`s still available.
James

Author:  Tim L [ Wed Mar 20, 2013 9:24 pm ]
Post subject:  Re: Burton's goods- Brazilian fingerboards !! Wed. afternoo

Burton,

I'll take fretboards G & H if you still have them.

Tim

Author:  Burton LeGeyt [ Wed Mar 20, 2013 9:32 pm ]
Post subject:  Re: Burton's goods- Brazilian fingerboards !! Wed. afternoo

Hey Tim,

H is available but G is sold.
Did you mean G and H or H and I?

Burton

Author:  Tim L [ Wed Mar 20, 2013 9:38 pm ]
Post subject:  Re: Burton's goods- Brazilian fingerboards !! Wed. afternoo

OK
That sound good too laughing6-hehe
H & I
I sent you a pm also

Tim

Author:  Burton LeGeyt [ Thu Mar 21, 2013 9:39 am ]
Post subject:  Re: Burton's goods- Brazilian fingerboards !! Wed. afternoo

Hey everybody,

I think all that is left are 2 Fingerboards. I'm happy to keep them if no one takes them :)

I also think I have sent pm's to everyone who has made purchases, if you are expecting one and have not received it please write me-

I should have the first packages out this weekend, I'll pm as they go.

Thanks!

Page 2 of 3 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/