Official Luthiers Forum!
http://www.luthiersforum.com/forum/

How would they treat Brock’s package
http://www.luthiersforum.com/forum/viewtopic.php?f=10102&t=3407
Page 1 of 1

Author:  Shane Neifer [ Sun Oct 02, 2005 6:00 pm ]
Post subject: 

I'm thinkin' insurance will be handy on this one. I think I will get some fragile stickers plastered on it. Not that that will make much difference, it will look like too much fun to someone between here and there! I hope it survives Brock! I packaged it well!


Author:  Brock Poling [ Sun Oct 02, 2005 11:47 pm ]
Post subject: 


yeah, that is just begging to get the javelin treatment.   

Hopefully it will be ok. We will keep our fingers crossed.


Author:  Dave-SKG [ Mon Oct 03, 2005 12:54 am ]
Post subject: 

First thing is to knock off that "little lump"thing taped onto the javelin then the fun will really begin. My guess is it will look more like a used door stop( and as small) by the time it arrives (It would if it were comming to me...ups, fed-x, usps...doesn't matter...they beat the daylights out of every thing that's addressed to "SKG").It's sort of a tradition now. When I get a package arrives that's only half mutilated we figure it must me another new guy.

Author:  Graham Steward [ Mon Oct 03, 2005 1:57 am ]
Post subject: 

If you don't mind me asking. What the heck is that?

Graham

Author:  Brock Poling [ Mon Oct 03, 2005 2:24 am ]
Post subject: 


double length purflings. Some of them are veneers. So that is probably why they can't be wrapped. They are just too fragile.


Author:  Shane Neifer [ Mon Oct 03, 2005 4:42 am ]
Post subject: 

Dave
When next I send wood to you I will add lots of extra padding. You are right, you are the only one that has reported any degree of damage. I put Brocks stuff in wood box using very tight grained fully quartered spruce for its strength and light weight. Hey, isn't that why they are guitar tops?

Shane

Author:  John Mayes [ Mon Oct 03, 2005 11:33 am ]
Post subject: 

are we really talking about Brocks package?

Author:  chmood [ Mon Oct 03, 2005 12:28 pm ]
Post subject: 

how about PVC pipe/conduit as a shipping container?

pretty cheap, pretty light, pretty easy, and you'll be paying a weird-shape
surcharge anyway. Sleeve one size inside another for extra rigidity.

Author:  old man [ Mon Oct 03, 2005 1:12 pm ]
Post subject: 

I like the PVC idea.   Welcome to the forum to beat all forums, Charlie. Where are you located?

Ron

Author:  Brock Poling [ Mon Oct 03, 2005 1:23 pm ]
Post subject: 

[QUOTE=John Mayes] are we really talking about Brocks package? [/QUOTE]

you crack me up...   

Author:  chmood [ Mon Oct 03, 2005 2:37 pm ]
Post subject: 

Hi, Ron.

North Atlanta
You around Hot Springs?chmood38628.9851388889

Author:  old man [ Mon Oct 03, 2005 11:28 pm ]
Post subject: 

No, I'm about 30 miles north of Little Rock.

Ron

Author:  Dave-SKG [ Tue Oct 04, 2005 12:53 am ]
Post subject: 

[QUOTE=Brock Poling] [QUOTE=John Mayes] are we really talking about Brocks package? [/QUOTE]

you crack me up...    [/QUOTE]
Brock I think what you mean to say is "you're all broken up"


Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/