Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Mar 29, 2024 3:22 am


All times are UTC - 5 hours





Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 14 posts ] 
Author Message
PostPosted: Mon May 19, 2008 8:48 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Nov 08, 2006 6:12 am
Posts: 216
Location: United States
Stayed Tuned!

_________________
Don Sharp
Got Brazilian?
http://www.sharpguitars.com


Last edited by sharp_custom on Sat Jun 07, 2008 8:26 am, edited 2 times in total.

Top
 Profile  
 
 Post subject: Re: Don Deals.
PostPosted: Mon Jun 02, 2008 7:33 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Nov 08, 2006 6:12 am
Posts: 216
Location: United States
Hold on. Experiencing technical difficulties.

_________________
Don Sharp
Got Brazilian?
http://www.sharpguitars.com


Top
 Profile  
 
 Post subject: Re: Don Deals.
PostPosted: Mon Jun 02, 2008 8:48 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Nov 08, 2006 6:12 am
Posts: 216
Location: United States
Want Brazilian Rosewood? Here's a few pieces from my wood pile. Will not ship any of these outside of the USA.

Image

G1S2: Back: 21-9/16” x 7-5/8” to 5-3/8” x 0.150”
Sides: 33-1/2” x 4 5/8” x 0.140”
Price: $500.00

IMG]http://i293.photobucket.com/albums/mm79/dsharp621/Swapmeet2008/G1S3.jpg[/IMG]

G1S3: Back: 21-9/16” x 7-5/8” to 5-5/16” x 0.155”
Sides: 33-1/2” x 4-13/16 x 0.160”
Price: $500.00

Image

G1S5: Back: 21-1/2” x 7-9/16” to 5-1/2” x 0.160”
Sides: 33-1/2” x 5” x 0.150”
Price: $500.00

Image

G2S6: Back: 21-5/8” x 7-13/16” x 0.160”
Sides: 33-1/2” x 4-7/8” x 0.152”
Price: $500.00

Image

G3S4: Back: 21-5/8” x 7-9/16” x 0.145”
Sides: 33-3/8” x 5” x 0.150”
Price: $500.00
Comments: Slight surface checking.

Image

G4S3: Back: 21-1/2” x 8-1/8” x 0.167”
Sides: 33-1/2” x 4-3/4” to 4-1/8” x 0.160”
Price: $500.00

Image

G5S2: Back: 21-1/2” x 7-7/8” x 0.150”
Sides: 33-1/2” x 4-7/8” to 3-9/16” x 0.145”
Price: $500.00

Image

G5S3: Back: 21-1/2” x 8-3/16” x 0.160”
Sides: 33-1/2” x 5” to 3-7/8” x 0.155”
Price: $500.00

Image

Image

G5S6: Back: 21-1/2” x 7-3/4” x 0.150”
Sides: 33-1/2” x 5” to 4” x 0.150”
Price: $500.00
Comments: Classical or smaller due to void.

Image

G6S5: Back: 21-1/2” x 8” x 0.155”
Sides: 33-1/8” x 4-3/4” to 4-1/8” x 0.145”
Price: $500.00

Image

G6S8: Back: 21-3/16” x 7-3/4” to 6-7/8” x 0.165”
Sides: 33-1/2” x 4-5/8” to 4-3/8” x 0.145”
Price: $500.00

Image

G6S9: Back: 20-3/4” x 7-3/4” x 0.170”
Sides: 33-1/2” x 4-1/2” to 3-7/16” x 0.130”
Price: $500.00

_________________
Don Sharp
Got Brazilian?
http://www.sharpguitars.com


Top
 Profile  
 
 Post subject: Re: Don Deals.
PostPosted: Mon Jun 02, 2008 9:12 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Nov 08, 2006 6:12 am
Posts: 216
Location: United States
Here's some unfinished projects I will never finish. I hope someone can use these.

Image

Description: Padauk J-17 (17" Jumbo) Back and Rim set. Sides are paudauk. Back is 3-piece Padauk and figured maple with Martin 45-style marquetry strips. Neck block is LMI style Mortise and tenon. Tail block is pattern grade ply. Sides are profiled. Price: SOLD Ken

Image

Image
Back Close Up

Image
Side Close UP

Description: Figured Birdseye maple Dreadnought Back and Rim Set. Neck and tail blocks are Martin Style Mahogany. Neck Joint is Mortise and tenon. Price: SOLD Ken

Image

Image

Description: Medium Figure Koa OM Cutaway Back and Rim Set. Back has a Martin 45-style strip inlaid. Neck block is LMI style Mortise and tenon. Tail block is pattern grade ply. Sides are profiled. Has a stabilized feather crack in cutaway. Price: SOLD Steve

Image

Image

Description: Description: Medium Figure Koa OM Cutaway Back and Rim Set. Back has a Martin 45-style strip inlaid. Neck block is LMI style Mortise and tenon. Tail block is pattern grade ply. Sides are profiled. Has a stabilized Crack in waist (Most of it will get routed off when binding). Price: $175.00.

_________________
Don Sharp
Got Brazilian?
http://www.sharpguitars.com


Last edited by sharp_custom on Wed Jun 04, 2008 1:55 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Jun 03, 2008 8:46 am 
Offline
Contributing Member
Contributing Member

Joined: Mon Dec 27, 2004 11:25 pm
Posts: 7195
Location: United States
I sure wish I had some money....I love that Set G659.
Flatsawn Brazilian can be gorgeous...fortunately, I have some very similar wood in my pile. So similar, in fact that I would sware they were from the same tree from flitched boards.

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."


Top
 Profile  
 
PostPosted: Tue Jun 03, 2008 1:24 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Hey Don,
I was looking at the koa OM cutaway back and rim set with the feather crack in the cutaway... I noticed what looks like CA stain in the photo. I guess that is where the crack is... I suppose that this area would clean up okay with sanding, right? ...and the crack should be a non-issue? Would you consider $150? :oops:

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
PostPosted: Tue Jun 03, 2008 1:42 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 01, 2007 3:15 pm
Posts: 2302
Location: Florida
would you take $225 for both the paduk and the birdseye maple sets?

_________________
Reguards,

Ken H


Top
 Profile  
 
PostPosted: Tue Jun 03, 2008 3:46 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Nov 08, 2006 6:12 am
Posts: 216
Location: United States
sdsollod wrote:
Hey Don,
I was looking at the koa OM cutaway back and rim set with the feather crack in the cutaway... I noticed what looks like CA stain in the photo. I guess that is where the crack is... I suppose that this area would clean up okay with sanding, right? ...and the crack should be a non-issue? Would you consider $150? :oops:



HI Steve. the crack is stabilized with CA. Sanding should take care of it. If you're interested, I'll accept your offer. Thanks, Don.

_________________
Don Sharp
Got Brazilian?
http://www.sharpguitars.com


Top
 Profile  
 
PostPosted: Tue Jun 03, 2008 3:47 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Nov 08, 2006 6:12 am
Posts: 216
Location: United States
Hodges_Guitars wrote:
would you take $225 for both the paduk and the birdseye maple sets?



Hi Ken: Sounds good!! Thanks, Don

_________________
Don Sharp
Got Brazilian?
http://www.sharpguitars.com


Top
 Profile  
 
PostPosted: Tue Jun 03, 2008 4:35 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Nov 16, 2007 8:36 am
Posts: 114
Location: United States
First name: kurt
Last Name: thomas
City: colden
State: ny
Zip/Postal Code: 14033
Status: Amateur
Hi Don,

First time I have done this, would you go $800.00 for G1s2 and G6s9?

Thanks,
Kurt

_________________
_____________________________

Kurt Thomas

"There's a first time for everything even if you do it by mistake."


Top
 Profile  
 
PostPosted: Tue Jun 03, 2008 4:44 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
HI Steve. the crack is stabilized with CA. Sanding should take care of it. If you're interested, I'll accept your offer. Thanks, Don.

Thanks Don, I'll take it.

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
PostPosted: Tue Jun 03, 2008 6:30 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Nov 08, 2006 6:12 am
Posts: 216
Location: United States
KThomas wrote:
Hi Don,

First time I have done this, would you go $800.00 for G1s2 and G6s9?

Thanks,
Kurt



Hi Kurt:

They're yours if you want them.

Thanks, Don

_________________
Don Sharp
Got Brazilian?
http://www.sharpguitars.com


Top
 Profile  
 
PostPosted: Tue Jun 03, 2008 6:55 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Nov 16, 2007 8:36 am
Posts: 114
Location: United States
First name: kurt
Last Name: thomas
City: colden
State: ny
Zip/Postal Code: 14033
Status: Amateur
Don,

Thanks, sure do, just let me know what I need to do to pay. One day, I hope to make a killer guitar out of them, if not, there's always Swapalooza 2010 laughing6-hehe

_________________
_____________________________

Kurt Thomas

"There's a first time for everything even if you do it by mistake."


Top
 Profile  
 
PostPosted: Tue Jun 03, 2008 7:41 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Nov 08, 2006 6:12 am
Posts: 216
Location: United States
Thanks all. Please PM your paypal and shipping info. I'll send you an invoice. Thanks, Don

_________________
Don Sharp
Got Brazilian?
http://www.sharpguitars.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 14 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com