In the heel... full length, fully glued(whatever's on hand will be more tha strong enough) and yes, orient the grain 'sideways'
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| neck inserts (again) http://www.luthiersforum.com/forum/viewtopic.php?f=10102&t=15256 |
Page 2 of 2 |
| Author: | mgcain [ Sun Jan 06, 2008 2:20 am ] |
| Post subject: | |
Mario and Brad - thanks for the replies - I do realize that bolt-on necks are acceptable, but the butt joint with no tenon is news to me. That's the part that threw me... Mario, if you have a butt joint, where is the dowel going? Mitch |
|
| Author: | grumpy [ Sun Jan 06, 2008 3:46 am ] |
| Post subject: | |
In the heel... full length, fully glued(whatever's on hand will be more tha strong enough) and yes, orient the grain 'sideways' |
|
| Author: | Todd Rose [ Sun Jan 06, 2008 7:35 am ] |
| Post subject: | |
Thanks again, Mario. Much appreciated. |
|
| Page 2 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
