Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Dremel Base
http://www.luthiersforum.com/forum/viewtopic.php?f=10102&t=12011
Page 1 of 1

Author:  Mark Kett [ Mon May 14, 2007 4:07 am ]
Post subject: 

A Simple Dremel
Base

Author:  nickton [ Fri Feb 18, 2011 4:50 pm ]
Post subject:  Re: Dremel Base

Very nice. The only thing I have a problem with is tapping that center hole. Seems like you need an awfully large size that is not in my cheap tap set. I made a pretty good one of aluminum, but I like the see through better.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/