| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| OLF SJ fit TKL SJ pro case? http://www.luthiersforum.com/forum/viewtopic.php?f=10102&t=10614 |
Page 1 of 1 |
| Author: | Terry Stowell [ Mon Jan 29, 2007 10:41 am ] |
| Post subject: | |
Anyone know if or how well the Olf SJ fits the TKL Pro series SJ case? Need to know ASAP Thanks in advance... |
|
| Author: | John Mayes [ Mon Jan 29, 2007 10:45 am ] |
| Post subject: | |
Terry, Actually those cases I'm selling are custom cases I had made for me, but obviously other guitars will fit. The dimensions of the guitar the case was made for are: 15 1/8" Lower Bout 11 1/8" Upper Bout 9 1/4" Waist 19 3/8" Body Length 4 1/2" Depth at Lower Bout 25.5 scale length 14 frets to body |
|
| Author: | Terry Stowell [ Mon Jan 29, 2007 2:21 pm ] |
| Post subject: | |
Mayes SJ &nbs p; O.L. F. SJ 15 1/8" Lower Bout 15 1/2" Lower Bout 11 1/8" Upper Bout 15 5/8" Upper Bout 9 1/4" Waist & nbsp; 9 3/4" Waist & nbsp; 19 3/8" Body Length 19 15/16" Body length 4 1/2" Depth at L. B. 4 1/2" depth at L.B. 25.5 scale length same 14 frets to body &n bsp; same Looks like it might make it some areas, and pretty tight in others.... ANyone tried this case? |
|
| Author: | John Mayes [ Mon Jan 29, 2007 2:24 pm ] |
| Post subject: | |
I'm pretty sure this case would work for ya... but I can't say for 100% as I don't have the guitar in hand... I sold some of these cases a while back and maybe somebody put an OLF SJ in the case.... |
|
| Author: | Terry Stowell [ Mon Jan 29, 2007 3:03 pm ] |
| Post subject: | |
Yeah' I'm hoping someone chimes in, I need a case! |
|
| Author: | Andy Zimmerman [ Mon Jan 29, 2007 3:54 pm ] |
| Post subject: | |
How about an Ameritage OLF SJ Case. I have an extra. They are awesome and they were custom made for us. The were taken right off of Michael Paynes direct measurements |
|
| Author: | Steve Saville [ Mon Jan 29, 2007 5:40 pm ] |
| Post subject: | |
[QUOTE=azimmer1] How about an Ameritage OLF SJ Case. I have an extra. They are awesome and they were custom made for us. The were taken right off of Michael Paynes direct measurements[/QUOTE] Terry, Here are a couple of photos of the Ameritage with my recent OLF SJ build in it. As you can see, it fits nice. I'm sorry I can't help with the other case. On John's case you have 1/2 inch of interference on the upper bout and body length. It all depends how much and how easily the side padding gives. 
 |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|