| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Bridge plate thickness for Falcate Gore plan? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=57719 |
Page 1 of 1 |
| Author: | Ed Haney [ Wed Jun 10, 2026 1:51 pm ] |
| Post subject: | Bridge plate thickness for Falcate Gore plan? |
I have the Gore facate plan for a medium body guitar which calls for a bridge plate thickness of 2.5mm. However, O'Brian's course of Gore teaching his falcate methods, Gore says the thickness of the bridge plate is 1.5mm. What is correct? What is your experience? |
|
| Author: | johnparchem [ Wed Jun 10, 2026 2:45 pm ] |
| Post subject: | Re: Bridge plate thickness for Falcate Gore plan? |
If I remember the text 2.5 mm no carbon fiber 1.5 mm with carbon fiber. That is how I do in any case. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|