Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 12:09 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Best string cutter
PostPosted: Sun May 07, 2023 8:49 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5398
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Which one do you find the best?
Getting tired of puncture wounds.
Anything leave a (relatively) blunt string end?
D'Addario type appears to shear rather than nip the wires like sidecutters, does that help?

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
 Post subject: Re: Best string cutter
PostPosted: Sun May 07, 2023 10:30 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5924
A mandolin playing friend (who has sadly, passed on) showed me a way to avoid the sharp end of the guitar string. She would clip the string end about 3/4 inch(+/-) from the post and then bend the string end in half so it formed a "V" shape with the sharp point pointing down. This has worked for me. bliss


Top
 Profile  
 
 Post subject: Re: Best string cutter
PostPosted: Sun May 07, 2023 11:03 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Conor... You haven't lived until you run a plain .018 up under your fingernail about a quarter inch. You'll see stars even with your eyes closed.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
 Post subject: Re: Best string cutter
PostPosted: Sun May 07, 2023 2:11 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7241
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Done the fingernail thing - not fun.

Best cutters I've found are just high-quality flush cutters. Cut with the flat side toward the post. The strings will still poke you but just not as bad. I also cut the strings as close to the post as I can get.

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post: Pmaj7 (Thu May 11, 2023 11:45 pm)
Top
 Profile  
 
 Post subject: Re: Best string cutter
PostPosted: Sun May 07, 2023 4:37 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Jun 22, 2007 11:14 am
Posts: 1011
Location: Newland, North Carolina
The fifth peg on a banjo is particularly notorious for gotchas. On these, I do similar to what Clay mentioned--I leave the string a little bit long, then double it over with the sharp end right next to the string, and pointing back towards the tuner shaft.

On guitars I'm getting fonder and fonder of locking tuners where I can just cut the strings really short, avoiding the problem all together.

Dave



These users thanked the author ballbanjos for the post: Chris Pile (Sun May 07, 2023 8:18 pm)
Top
 Profile  
 
 Post subject: Re: Best string cutter
PostPosted: Sun May 07, 2023 5:00 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed Jan 08, 2014 7:58 pm
Posts: 272
First name: Leo
Last Name: Pedersen
City: Bowen Island
State: British Columbia
Zip/Postal Code: V0N 1G2
Country: Canada
Focus: Build
Status: Amateur
Anyone here use the Evan Gluck trick?

https://youtu.be/M0noE2TwJ8E?t=305

No tool required.


But to answer the original question I like my Piano wire cutters: https://www.leevalley.com/en-ca/shop/tools/hand-tools/pliers/71973-nws-regular-and-high-leverage-side-cutters?item=24K2140



These users thanked the author Durero for the post: Pmaj7 (Thu May 11, 2023 11:55 pm)
Top
 Profile  
 
 Post subject: Re: Best string cutter
PostPosted: Sun May 07, 2023 5:34 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3227
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
I don't like that trick. It seems like it would allow the string to slip, especially the smaller strings. I like to bend the tail at an angle that is opposite to the other side of the post, which provides a bit of a lock to slippage. And then just cut is as short as possible.



These users thanked the author Barry Daniels for the post: Pmaj7 (Fri May 12, 2023 12:05 am)
Top
 Profile  
 
 Post subject: Re: Best string cutter
PostPosted: Sun May 07, 2023 10:09 pm 
Offline
Koa
Koa

Joined: Tue Jan 15, 2013 10:00 pm
Posts: 980
First name: Josh
Focus: Build
Status: Amateur
My preference is small side cutters, clip as close to the post as possible. I’ve never stabbed myself on a string cut this way, it’s always where someone has left a “long tail” sticking out when clipping the strings.

The Gluck trick makes me nervous for some reason but the guy has fixed a zillion guitars and built a good rep over many years so I’m sure its fine.


Top
 Profile  
 
 Post subject: Re: Best string cutter
PostPosted: Sun May 07, 2023 10:41 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5924
A tuner I use on my travel guitars is the Kluson with the safety posts. The string end is buried in the hollow post. For those who absolutely hate pricking their finger on a string end this might be a solution:
https://reverb.com/item/36367744-kluson ... s-kd-6b-np
They make them 3 on a side or 6 inline style.
Stringing video:
https://www.youtube.com/watch?v=fnSvEhySebg


Top
 Profile  
 
 Post subject: Re: Best string cutter
PostPosted: Thu May 11, 2023 7:06 am 
Offline
Koa
Koa

Joined: Wed Feb 17, 2016 8:54 am
Posts: 854
State: Texas
Country: United States
Focus: Repair
For a pair of cutters the Knipex 74-02-200 have lasted me 9+ years of daily nonstop use in my repair shop. As far as the sharp post cut points go they don't do anything to mitigate that. Any cut end of metal will by nature be sharp

https://www.lowes.com/pd/KNIPEX-Angled- ... lsrc=aw.ds



These users thanked the author DanKirkland for the post: Chris Pile (Thu May 11, 2023 8:25 am)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: CarlD, meddlingfool and 50 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com