Jay, going to steal this.
Sent from my iPhone using Tapatalk Pro
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Wooden “label” http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=55349 |
Page 1 of 1 |
| Author: | SnowManSnow [ Sat Nov 12, 2022 6:03 pm ] |
| Post subject: | Wooden “label” |
Somewhere , maybe here, someone uses a small oval w a logo for their label … glued to the inside of the back… any idea where I can see this? Thinking of having some made Sent from my iPhone using Tapatalk |
|
| Author: | doncaparker [ Sat Nov 12, 2022 6:40 pm ] |
| Post subject: | Re: Wooden “label” |
I recently posted a photo of my 9th guitar. It has what you are describing, but it is round, not oval. It's in this thread: viewtopic.php?f=10101&t=55323 I burned my logo onto some top scrap with a branding iron my wife had made for me, cut and sanded around the circle border, and put it right under the soundhole as part of the center seam reinforcement strip (making sure the grain ran the right way). I think it's a nice addition. |
|
| Author: | Ken Lewis [ Sat Nov 12, 2022 6:54 pm ] |
| Post subject: | Re: Wooden “label” |
I remembered James Orr posting his labels some years ago. A quick search turned up this. viewtopic.php?f=10101&t=31005&p=410662&hilit=wooden+label#p410662 |
|
| Author: | J De Rocher [ Sat Nov 12, 2022 8:01 pm ] |
| Post subject: | Re: Wooden “label” |
Maybe you saw a photo of the oval wood soundhole labels I had made a while back. I had a bunch of these laser etched and cut out from a mahogany board. Ahead of time, I routed a channel down the middle of the back of the board that was the width and depth of the center reinforcement strip on the guitar. The labels were centered on that channel so the labels can sit down over the strip and rest on the guitar back. I also tried using bubinga but there was too much oil in that wood and it burned badly. Attachment: Wood guitar label.jpg
|
|
| Author: | bcombs510 [ Sat Nov 12, 2022 8:37 pm ] |
| Post subject: | Re: Wooden “label” |
Jay, going to steal this. Sent from my iPhone using Tapatalk Pro |
|
| Author: | SnowManSnow [ Sat Nov 12, 2022 8:45 pm ] |
| Post subject: | Wooden “label” |
bcombs510 wrote: Jay, going to steal this. Sent from my iPhone using Tapatalk Pro Paper is sooooo 2021 haha Sent from my iPhone using Tapatalk |
|
| Author: | jfmckenna [ Sat Nov 12, 2022 9:35 pm ] |
| Post subject: | Re: Wooden “label” |
LOL! Those are quite beautiful indeed, I love it. But I'm a paper guy I'm restoring a 1840's Schmidt and Maul guitar now with the original paper label in pristine condition. I just love it, is all I can say
|
|
| Author: | WudWerkr [ Wed Nov 16, 2022 4:56 pm ] |
| Post subject: | Re: Wooden “label” |
I have a Plug in Branding Iron... Make my own Not as Pretty , but effective Attachment: Cnara 10.jpg
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|