| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Where did I get this truss rod? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=55161 |
Page 1 of 1 |
| Author: | Pegasusguitars [ Wed Jul 27, 2022 4:15 pm ] |
| Post subject: | Where did I get this truss rod? |
I have a few old truss rods lying around. I would like to find out where I got this one. Double action, stainless, 15". The nut end is distinctively different than many others. Very compact design on the nut end. Recognize it? Thanks, Bob |
|
| Author: | rbuddy [ Wed Jul 27, 2022 4:27 pm ] |
| Post subject: | Re: Where did I get this truss rod? |
Allied https://alliedlutherie.com/collections/flexstrong-truss-rods/products/flexstrong-truss-rods I use them. |
|
| Author: | joshnothing [ Wed Jul 27, 2022 5:19 pm ] |
| Post subject: | Re: Where did I get this truss rod? |
Definitely allied and they are great rods in my opinion. Sent from my iPhone using Tapatalk |
|
| Author: | Pegasusguitars [ Wed Jul 27, 2022 6:37 pm ] |
| Post subject: | Re: Where did I get this truss rod? |
Thanks.Long time since I did any business with Allied, but I looked at some images and looks like the rod alright. Thanks, Bob |
|
| Author: | Hesh [ Thu Jul 28, 2022 2:24 am ] |
| Post subject: | Re: Where did I get this truss rod? |
Bob maybe check the adjustor in a vice on each one before using. Back in the day when I was building 2010ish and before Allied had a batch of truss rods that the adjustors failed and broke off, the welds failed. We discussed it here for a few years and all knew to test first before use. I tossed mine and went with the Blanchard rod taking no chances. I'm sure the issue (welds) has been addressed but these could be of that vintage. These rods looked a lot like the Blanchard rod too which you can tell by the dissimilar threads, key to it's unique and notable design. |
|
| Author: | Pegasusguitars [ Thu Jul 28, 2022 9:03 pm ] |
| Post subject: | Re: Where did I get this truss rod? |
Thanks. It's good idea to test any welded truss rod.-Bob |
|
| Author: | Barry Daniels [ Fri Jul 29, 2022 8:15 am ] |
| Post subject: | Re: Where did I get this truss rod? |
It's kind of odd that you can't see visible welds on that rod. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|