Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 4:53 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Bandsaw 8" question
PostPosted: Fri Jan 21, 2022 8:49 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Aug 14, 2010 10:50 am
Posts: 361
First name: herry
Last Name: trismono
City: malang
State: east java
Zip/Postal Code: 65142
Country: Indonesia
Focus: Build
Status: Amateur
Hi. I need to buy small Bandsaw. My question. Is mini Bandsaw 8" enough for Neck building.
spec:
cut depth: 80mm
cut width: 195mm
titling: 45'
thankyou [uncle]


Top
 Profile  
 
 Post subject: Re: Bandsaw 8" question
PostPosted: Sat Jan 22, 2022 6:02 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12971
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Harry I think that an 8" is too small. I have a 9" (and a 14") and my 9" is too small for neck blanks IMO. Can it be done? Sure with some struggle but you are pushing the tool and that can be unsafe.

_________________
Ann Arbor Guitars



These users thanked the author Hesh for the post: herry tze (Sat Jan 22, 2022 11:26 am)
Top
 Profile  
 
 Post subject: Re: Bandsaw 8" question
PostPosted: Sat Jan 22, 2022 6:37 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5398
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
I have a 10"/350 watts (0.47 HP) which handles necks blanks well - even Wenge, Padauk (cut from 6"x3"), Mahogany etc. no problem.
Also used it to resaw sides.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.



These users thanked the author Colin North for the post: herry tze (Sat Jan 22, 2022 11:21 am)
Top
 Profile  
 
 Post subject: Re: Bandsaw 8" question
PostPosted: Sat Jan 22, 2022 9:13 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Feb 28, 2009 10:34 pm
Posts: 1055
First name: Rob
Last Name: McDougall
City: Cochrane
State: Alberta
I have a 10" Craftsman/Rikon and it handles neck blanks just fine.
I just cut a 1 1/2" Ash body blank for an electric, no problems....



These users thanked the author Robbie_McD for the post: herry tze (Sat Jan 22, 2022 11:23 am)
Top
 Profile  
 
 Post subject: Re: Bandsaw 8" question
PostPosted: Sat Jan 22, 2022 10:31 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2246
Location: Seattle WA
Focus: Build
Status: Semi-pro
I did it with a Delta 9". I think it was 1/3hp. It worked, but the cuts needed much clean up.

Pat

_________________
Pat



These users thanked the author Pmaj7 for the post: herry tze (Sat Jan 22, 2022 11:23 am)
Top
 Profile  
 
 Post subject: Re: Bandsaw 8" question
PostPosted: Sat Jan 22, 2022 11:20 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Aug 14, 2010 10:50 am
Posts: 361
First name: herry
Last Name: trismono
City: malang
State: east java
Zip/Postal Code: 65142
Country: Indonesia
Focus: Build
Status: Amateur
Hesh wrote:
Harry I think that an 8" is too small. I have a 9" (and a 14") and my 9" is too small for neck blanks IMO. Can it be done? Sure with some struggle but you are pushing the tool and that can be unsafe.


We have brand for 9" here just the same max cutting depth 80mm with 8" brand, maybe I must go to 10" or 12"
thanks Hesh :)



These users thanked the author herry tze for the post: Hesh (Sat Jan 22, 2022 11:35 am)
Top
 Profile  
 
 Post subject: Re: Bandsaw 8" question
PostPosted: Sat Jan 22, 2022 11:22 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Aug 14, 2010 10:50 am
Posts: 361
First name: herry
Last Name: trismono
City: malang
State: east java
Zip/Postal Code: 65142
Country: Indonesia
Focus: Build
Status: Amateur
Colin North wrote:
I have a 10"/350 watts (0.47 HP) which handles necks blanks well - even Wenge, Padauk (cut from 6"x3"), Mahogany etc. no problem.
Also used it to resaw sides.

thanks Colin North. bliss


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: doncaparker, Glen H, meddlingfool, Stuart Flavell and 51 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com