Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 5:14 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 14 posts ] 
Author Message
PostPosted: Wed Jan 19, 2022 8:46 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3288
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Hi folks,

Not specifically guitar related, but I’m prototyping some tooling for instrument making and looking for a way to have a small quantity of metal plates made. Small 1.5” x 1.5” or so squares.

Has anyone found an online supplier for metalwork similar to ePlastics for plastic items? I did find this place but it’s crazy expensive, 20+ dollars for a single piece. https://metalscut4u.com

Any ideas are appreciated as long as it’s not recommending I cut them myself. :D

Brad


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
PostPosted: Wed Jan 19, 2022 9:58 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7241
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I've used several of the online metal fab places to build prototype enclosures for electronics and they were all really expensive. Have you checked with local machine shops? Often the local guys will be cheaper for a run of small parts, just send them the specs and drawing (if needed) and ask for a quote.

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post (total 2): bcombs510 (Wed Jan 19, 2022 12:50 pm) • Barry Daniels (Wed Jan 19, 2022 10:27 am)
Top
 Profile  
 
PostPosted: Wed Jan 19, 2022 10:47 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5924
Why not cut them yourself? If you pick a relatively soft metal like aluminium you can mill it with woodworking tools. I have cut aluminium plate up to 1/2 inch thick on my tablesaw using a carbide tipped sawblade. One caveat - don't use a grinding wheel or abrasive cut off wheel - the metal will gall and heat up the disc and cause it fly apart. Other than that, it can be sawn, drilled and routed if reasonable care is taken (eye protection for flying millings).



These users thanked the author Clay S. for the post: bcombs510 (Wed Jan 19, 2022 12:51 pm)
Top
 Profile  
 
PostPosted: Wed Jan 19, 2022 11:55 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3552
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur
Ponoko had the best prices when I looked into having some metal parts made a couple years ago. But I ended up putting the money toward building my own mini mill instead, so I can't speak to the actual service.

Make sure you have the full machining procedure laid out before you cut anything. 80% of machining is figuring out how to hold onto the darn thing. If you start with small pieces, there may not be anywhere to grip without getting in the way of the cutter, or losing grip before all operations are complete.



These users thanked the author DennisK for the post: bcombs510 (Wed Jan 19, 2022 12:52 pm)
Top
 Profile  
 
PostPosted: Wed Jan 19, 2022 12:07 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3227
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
You can also cut aluminum on a wood bandsaw.

I have been hankering for a portable metal cutting bandsaw which you can setup into a small table. With this kind of setup you can easily cut 1/4" steel.

https://www.swagoffroad.com/SWAG-V30-Portaband-Table_p_55.html



These users thanked the author Barry Daniels for the post: bcombs510 (Wed Jan 19, 2022 12:52 pm)
Top
 Profile  
 
PostPosted: Wed Jan 19, 2022 1:16 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2931
Location: United States
Protolabs has worked well for me at the day job. Instant quote online


Sent from my iPhone using Tapatalk

_________________
Jim Watts
http://jameswattsguitars.com



These users thanked the author Jim Watts for the post: bcombs510 (Wed Jan 19, 2022 3:53 pm)
Top
 Profile  
 
PostPosted: Wed Jan 19, 2022 1:59 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5924
I have cut brass and nickel silver sheet metals and thin aluminium on my 14 inch bandsaw using a fine tooth metal cutting blade. Steel requires some oil to cool the blade and is messy but some saws are set up for it.

Does it have to be metal? Some plastics (Corian) and phenolics (Richlite) might give the strength you need and better machineability for prototyping. How many squares do you need?



These users thanked the author Clay S. for the post: bcombs510 (Wed Jan 19, 2022 3:53 pm)
Top
 Profile  
 
PostPosted: Wed Jan 19, 2022 2:11 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Jun 22, 2007 11:14 am
Posts: 1011
Location: Newland, North Carolina
Barry Daniels wrote:
You can also cut aluminum on a wood bandsaw.

I have been hankering for a portable metal cutting bandsaw which you can setup into a small table. With this kind of setup you can easily cut 1/4" steel.

https://www.swagoffroad.com/SWAG-V30-Portaband-Table_p_55.html


I have one of the SWAG tables, but it's one you clamp in a vise. Works great. I got my saw on sale at Harbor Freight (Bauer brand)s everal years ago, and it's still working great. Paid more for the SWAG table than I did for the saw.

Dave



These users thanked the author ballbanjos for the post (total 2): bcombs510 (Wed Jan 19, 2022 3:53 pm) • Barry Daniels (Wed Jan 19, 2022 3:18 pm)
Top
 Profile  
 
PostPosted: Thu Jan 20, 2022 12:20 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
In my previous life I was an engineer for a metal fabrication plant. We had all sorts of fancy machine tools, the most useful for guitar related things was a computer controlled laser sheet metal cutter. You design a 2 dimensional piece with any good drafting software and output a dfx file to the laser. It cuts as many pieces as you want out of, in our case, either black iron or stainless.

I rarely made any actual pieces for guitars but used it quite a bit for making templates and jigs. Because the machine was big and expensive my company tried to keep it working and would do cutting for outside customers. If you didn't have a 2 drafting ability the would do the engineering at a nominal cost. They would furnish "normal" materials, if the customer wanted something special that would be up to them.

I think there are lots of little fab companies that will do this kind of work.



These users thanked the author Freeman for the post: bcombs510 (Thu Jan 20, 2022 12:37 pm)
Top
 Profile  
 
PostPosted: Thu Jan 20, 2022 2:57 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jun 02, 2013 8:16 am
Posts: 359
First name: Brian
City: U.P.
State: Michigan
Focus: Build
Brad, it would be easier to make recommendations if we knew more of what you want. What metal, 1.5" cubes or 1/4" flat plates, or?, how many, all the same, any other specs? Is there a level of accuracy necessary?

I do as much of my metal work as I can myself. When I need more precision there is a semi retired machinist I call on. If it is just cutting metal there are fab shops that can shear metal to size very inexpensively, or punch holes, etc.

_________________
Brian R, Wood Mechanic
N8ZED



These users thanked the author rbuddy for the post: bcombs510 (Thu Jan 20, 2022 3:20 pm)
Top
 Profile  
 
PostPosted: Fri Jan 21, 2022 11:06 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3288
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
rbuddy wrote:
Brad, it would be easier to make recommendations if we knew more of what you want. What metal, 1.5" cubes or 1/4" flat plates, or?, how many, all the same, any other specs? Is there a level of accuracy necessary?


That's a good point, Brian.

I'm looking for flat plates 1/8" thick and 1" x 1.125" with .125"- .25" radius corners. There should be a .25" centered hole through the plate. I would be looking for 20 to start. The material should be aluminum or stainless.

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
PostPosted: Fri Jan 21, 2022 11:22 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2931
Location: United States
Brad, you might look into laser cutting, here's one I was interested in once https://www.oshcut.com/. I haven't used them but was looking at them to some templates. If I remember right they charge a set up fee and then a very reasonable part charge.

_________________
Jim Watts
http://jameswattsguitars.com



These users thanked the author Jim Watts for the post: bcombs510 (Fri Jan 21, 2022 11:24 am)
Top
 Profile  
 
PostPosted: Fri Jan 21, 2022 12:04 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Jun 22, 2007 11:14 am
Posts: 1011
Location: Newland, North Carolina
Jim Watts wrote:
Brad, you might look into laser cutting, here's one I was interested in once https://www.oshcut.com/. I haven't used them but was looking at them to some templates. If I remember right they charge a set up fee and then a very reasonable part charge.


I might have just hit a bad batch, but a couple of years ago, I had some parts laser cut out of 1/4" 6061 aluminum, and they weren't usable. The edges were far from square and the finish quality wasn't great. I ended up milling my own parts on my milling machine...Like I say, could just be a bad run. It was emachineshop.com that ran the parts. I thought I'd try laser cut because they were a lot less expensive. Live and learn.

I've lasered some templates out of wood and acrylic, and the laser works great for these.

Water Jet is another thing to explore. The water jet pieces I've seen in both aluminum and steel were very very clean.

Dave



These users thanked the author ballbanjos for the post: bcombs510 (Fri Jan 21, 2022 12:21 pm)
Top
 Profile  
 
PostPosted: Fri Jan 21, 2022 12:31 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3288
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Jim Watts wrote:
Brad, you might look into laser cutting, here's one I was interested in once https://www.oshcut.com/. I haven't used them but was looking at them to some templates. If I remember right they charge a set up fee and then a very reasonable part charge.


Thanks a lot, Jim! Looks like OSH can do this in high strength aluminum for a good price. I will give this a shot.

Attachment:
osh.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com