***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Apr 15, 2024 11:47 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
phavriluk
 Post subject: bending 'black limba'
PostPosted: Sun Oct 18, 2020 9:20 am 
Offline
Koa
Koa

Joined: Mon Feb 13, 2012 8:49 pm
Posts: 952
First name: peter
Last Name: havriluk
City: granby
State: ct
Zip/Postal Code: 06035
Country: usa
Focus: Build
Status: Amateur
I'm using this wood for the first time and I'm fishing for comments/advice about bending the sides in a Fox bender.

Thanks very much.

_________________
Peter Havriluk
Top
 Profile  
 
Michaeldc
PostPosted: Sun Oct 18, 2020 12:05 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1446
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
I find it to be an easy bend. I use SS slats, 6” painters paper, and Windex w/ammonia ala Mr, Hall. I thinkness to .085” or until it feels right. My hi temp is 320°, start the waist bend at 280°, then hold @ 260°, then down to room temp, twice.

Good luck, M
Top
 Profile  
 
phavriluk
PostPosted: Sun Oct 18, 2020 2:30 pm 
Offline
Koa
Koa

Joined: Mon Feb 13, 2012 8:49 pm
Posts: 952
First name: peter
Last Name: havriluk
City: granby
State: ct
Zip/Postal Code: 06035
Country: usa
Focus: Build
Status: Amateur
Michael, thanks. Nice, complete, list of temperatures and spraying. Much obliged.

_________________
Peter Havriluk
Top
 Profile  
 
meddlingfool
PostPosted: Sun Oct 18, 2020 10:21 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7250
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
Yeah, bends easy, no special tricks required...
Top
 Profile  
 
LaurieW
PostPosted: Tue Oct 20, 2020 10:52 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Apr 25, 2007 8:39 am
Posts: 515
Focus: Build
Status: Amateur
Windex? I have to look that one up in the archives ;)

_________________
____________________________________
Time you enjoy wasting is not wasted time.
Top
 Profile  
 
Michaeldc
PostPosted: Tue Oct 20, 2020 11:17 am 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1446
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
LaurieW wrote:
Windex? I have to look that one up in the archives ;)


If I’m remembering correctly John Hall was the first to suggest using windex w/ammonia. I knew about Ammonia for bending but never put the two together. Another side benefit is that the windex evaporates much faster than water. Works like a champ!

M


Last edited by Michaeldc on Tue Oct 20, 2020 6:27 pm, edited 1 time in total.

These users thanked the author Michaeldc for the post: Pmaj7 (Tue Oct 20, 2020 3:19 pm)
Top
 Profile  
 
meddlingfool
PostPosted: Tue Oct 20, 2020 3:26 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7250
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
Hmm...
Top
 Profile  
 
CarlD
PostPosted: Tue Oct 20, 2020 3:41 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 11, 2013 2:26 pm
Posts: 456
First name: Carl
Last Name: Dickinson
City: Forest Ranch
State: California
Zip/Postal Code: 95942
Country: USA
Focus: Build
Status: Amateur
I've used it on several recent bends instead of supersoft. Worked great. Lightly sprayed the sides and dipped the packing paper strips in it too (squeegeed off).
Make sure to use the Windex Original with ammonia in it.


These users thanked the author CarlD for the post: Pmaj7 (Tue Oct 20, 2020 4:59 pm)
Top
 Profile  
 
Joe Beaver
PostPosted: Wed Oct 21, 2020 12:11 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Feb 09, 2006 2:35 pm
Posts: 2951
Location: United States
First name: Joe
Last Name: Beaver
City: Lake Forest
State: California
Focus: Build
If you have had luck bending sapele, then bend black limba the same way.
If Not this works for me.
1. Spray wood well with water.
2. sandwich it from the bottom or as you prefer with: Slat, Blanket, tin foil, wet paper, wood, wet paper, tin foil, slat.
3. Heat up until it sizzles and a little stream shows, modulate the heat to keep it around 300.
4. Slowly bent the waist in.
5. Unplug the blanket and spray water into the waist to cool.
6. Since I put the blanket under the wood on the bender, with the waist bent, the upper and lower bout wood will be above the blanket. I use spring clamps and raise the upper bout sandwich up against the wood. Turn the heat back on and bend as before. Once bent, turn heat off, Cool the waist again, and repeat for the lower bout.

_________________
Joe Beaver
Maker of Sawdust
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: Terence Kennedy, Zac Stout and 30 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com