| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| finished another one http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=53045 |
Page 1 of 1 |
| Author: | alan stassforth [ Thu Mar 26, 2020 7:07 pm ] |
| Post subject: | finished another one |
Sycamore back and sides, spruce top, etc. I like the 'violin' type edge look, but don't knock it against anything hard. Thin box, very balanced tone, not too bass. Alan |
|
| Author: | jfmckenna [ Thu Mar 26, 2020 8:06 pm ] |
| Post subject: | Re: finished another one |
Love that heel inlay. Is the whole neck Lacewood? |
|
| Author: | Chris Pile [ Thu Mar 26, 2020 8:21 pm ] |
| Post subject: | Re: finished another one |
Sweetness. |
|
| Author: | Colin North [ Fri Mar 27, 2020 5:08 am ] |
| Post subject: | Re: finished another one |
Dang, that's nice! |
|
| Author: | Victor Seal [ Fri Mar 27, 2020 6:56 am ] |
| Post subject: | Re: finished another one |
Wow!! |
|
| Author: | Bryan Bear [ Fri Mar 27, 2020 8:25 am ] |
| Post subject: | Re: finished another one |
that looks nice. I like the violin style overhang too, too bad it can be so vulnerable. One thing that would help is if you used a purfling line then install a binding that overhangs. A hardwood of similar color would be ideal but even a binding of the same top wood would be less prone to splitting along short grain. |
|
| Author: | Andy Bounsall [ Fri Mar 27, 2020 9:18 am ] |
| Post subject: | Re: finished another one |
Very, VERY nice! |
|
| Author: | alan stassforth [ Fri Mar 27, 2020 11:36 am ] |
| Post subject: | Re: finished another one |
Thanks! It's a square neck, solid lacewood neck, and the heel cap is there because I had problems with the neck angle, and had to cover up a big mess. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|